[c-nsp] Schedular Allocate

Amol Sapkal amolsapkal at gmail.com
Sun Oct 10 05:53:03 EDT 2004


Prit,

Here is a link:
http://www.cisco.com/en/US/products/hw/switches/ps718/products_command_reference_chapter09186a008007dd4f.html#1041658

The above should explain you quiet a bit about it. Normally, scheduler
allocate should be used on routers that switch a lot of traffic.
I am not sure, but I think you dont need to keep this command live all
the time. Should be used only during heavy loads.

Guys, correct me if I am wrong.




On Sun, 10 Oct 2004 11:00:31 +0530, Prit Patel <shahtejal at gmail.com> wrote:
> Hello All,
> 
> What is the use of schedular allocate in CISCO IOS.
> How we can use in service provider environment more effectively.
> 
> Regards
> Prit
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 


-- 
Warm Regds,

Amol Sapkal

--------------------------------------------------------------------
An eye for an eye makes the whole world blind 
- Mahatma Gandhi
--------------------------------------------------------------------


More information about the cisco-nsp mailing list