[c-nsp] OID for monitoring E1 link status

[Stephen J. Wilcox]

ifStatus?

On Thu, 14 Oct 2004, tusker keg wrote:

> Howdy'
> 
> I have 4E1s which are a member of a ppp multilink group, from time to time
>    an E1 member of the group  experiences physical link failure , gets
> looped or simply  put experiences a state other than Intf up line
> protocol up.
> 
> Are there OIDs for monotiring the various link status states?
> 
> ( Tried DS1-MIB,RFC2495-MIB to no luck)
> 
> regards
> ./tusker
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>