[c-nsp] 6816 w/o SFM ?

[Alex Rubenstein]

Found this with about 1 minute of searching on CCO.

It is a dCEF256 card.


http://www.cisco.com/en/US/products/hw/switches/ps708/prod_release_note09186a00800b6059.html

Note:	Supported only with Supervisor Engine 2.
 	Requires Switch Fabric Module.
 	In WS-C6513 chassis, supported only in slots 9 through 13.


---

http://www.cisco.com/en/US/products/hw/modules/ps2797/ps4636/index.html

The Catalyst 6500 16-port Fabric-enabled GBIC-based Gigabit Ethernet 
Module, providing integrated Cisco Express Forwarding (CEF), is designed 
for high-density Gigabit core aggregation.

Key Features:

Interface: 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX
Backplane Connection: Switch fabric, Bus
Forwarding: Integrated Cisco Express Forwarding (CEF)
Queues per Port: 3 transmit, 2 receive

--

more information:

http://www.cisco.com/en/US/products/hw/switches/ps708/products_data_sheet0900aecd801459a7.html

WS-X6816-GBIC
  16-port dCEF256 Gigabit Ethernet interface module for the Cisco Catalyst 
6500 Series switches with dual fabric channel interfaces and distributed 
forwarding; requires GBICs and distributed forwarding card.





On Wed, 20 Oct 2004, Deepak Jain wrote:

>
> Will a WS-6816 work in a SUP-2U/MSFC2 without a Switch Fabric Module as a 
> standard 32Gb/s bus card?
>
> Thanks,
>
> DJ
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>

-- Alex Rubenstein, AR97, K2AHR, alex at nac.net, latency, Al Reuben --
--    Net Access Corporation, 800-NET-ME-36, http://www.nac.net   --