[c-nsp] "show trunk" equivalent in Native IOS of 6509

[Ivan Batanov]

Sam Munzani wrote:

> Hi,
>
> I apologize for this stupid question. I can't seem to figure out 
> what's equivelent of cat-os command "show trunk" in 6509 Native IOS? 
> All I need to see is number of trunk ports, their encapsulation types 
> and status.
>
> I am running 12.2.17d-SXB4.
>
> Thanks,
> Sam
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

router#sh interface trunk

Port      Mode         Encapsulation  Status        Native vlan
Gi1/1     on           802.1q         trunking      1
Po10      on           802.1q         trunking      10

Port      Vlans allowed on trunk
Gi1/1     none
Po10      
10,300,400-402,404-405,408-410,412,414-415,417-418,421-422,425-430,433,437-439,503,505,909,1002-1005

Port      Vlans allowed and active in management domain
Gi1/1     none
Po10      
10,300,400-402,404-405,408-410,412,414-415,417-418,421-422,425-430,433,437-439,503,505,909

Port      Vlans in spanning tree forwarding state and not pruned
Gi1/1     none
Po10      
10,300,400-402,404-405,408-410,412,414-415,417-418,421-422,425-430,433,437-439,503,505,909

-Ivan Batanov
Earthlink, Inc
AS4355