[c-nsp] 2600 Disaster Recovery

[Voll, Scott]

Are you doing this over a WAN or Local?  I had the problem over a WAN
timing out.  Is there enough flash for the image?

Scott

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Tony Mucker
Sent: Tuesday, October 26, 2004 10:52 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] 2600 Disaster Recovery

I'm trying to get a spare 2610XM up and running to use during our 
upcoming office move.

I'm in ROMMON attempting to TFTP an image from a server.  The actual 
TFTP image transfer looks fine, but then when it tries to erase the 
flash it has a problem.  I've also tried transferring the image over 
xmodem on the serial cable, with the same results.  Anyone have any 
ideas on this?  Googling for the error message only gives me one page, 
and it's in Russian.

File reception completed.
Copying file c2600-i-mz.122-26.bin to flash.
Erasing flash at 0x60480000sector erase failed at location 0x60480000, 
status 0x20
flash sector will NOT erase...aborting

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/