[c-nsp] Cisco to Nortel E1- PRI connection

[Mustafa N. Deeb]

can you start with  "debug isdn q931 and debug isdn q921"?


----- Original Message ----- 
From: "Cowher, John" <CowherJohn at praintl.com>
To: <cisco-nsp at puck.nether.net>
Sent: Wednesday, October 27, 2004 1:25 PM
Subject: [c-nsp] Cisco to Nortel E1- PRI connection


Hello,

Has anyone made a Cisco to Nortel Meridian connection with an E1
interface?  We don't have the EURO software on the PBX so must use
either DMS100 or other 4/4ESS emulated connection.  With all configured
as such, the physical link and Dchannel come up, but in the PBX the
configured tie trunks come up as Idle * , which we believe is a
maintenance busy state, when placing a call, it does not go through and
the Dchannel message is BC Not Implemented?

Any help would be appreciated.

Thanks

JC



--------------------------------------------------------------------------------


> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/