[c-nsp] ISDN to Mauritius / change bearer to speech onoutgoingcalls

[Brian Turnbow]

You may not have data service activated on the BRI line, thus the bear cap message. 
You can try and test the local line by calling a known good number with a 64k data call. If it works , the problem is that your carrier is not allowing 64k data calls thru to Mauritius and you need to contact them. 

Brian

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Michael Markstaller
Sent: venerdì 29 ottobre 2004 17.57
To: cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] ISDN to Mauritius / change bearer to speech onoutgoingcalls

Many thanks, that whas what I looked for. 
although getting an ISDN-connect now, ppp doesn't see each other; I expect some bad things for data-connections are done with the bits on the way down to Mauritius..
looks like I'll have to find another way to access it, for now CoV (console-over-vnc) works ;)

Michael

-----Original Message-----
From: Josh Duffek [mailto:consultantjd16 at ridemetro.org]
Sent: Friday, October 29, 2004 4:46 PM
To: Michael Markstaller; cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] ISDN to Mauritius / change bearer to speech on outgoingcalls


Check this out:
http://www.cisco.com/warp/public/793/access_dial/4.html#device-2

josh duffek    network engineer
consultantjd16 at ridemetro.org

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp- 
> bounces at puck.nether.net] On Behalf Of Michael Markstaller
> Sent: Friday, October 29, 2004 9:40 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] ISDN to Mauritius / change bearer to speech on 
> outgoingcalls
> 
> Hi,
> 
> I'm dealing with a strange problem:
> I have a c1712 sitting in Mauritius and cannot call it from Germany
with
> my dialout-box.
> The error I get on the dialout-box is "0x81C1 - Bearer capability not 
> implemented"
> "deb isdn q931" on the box in mauritius says nothing..
> 
> BUT, when using a normal phone with ISDN bearer cap "speech", the call 
> gets through, I can see it there in the debug and when setting "isdn 
> incoming-voice data" on the BRI interface the call also gets answered.
> 
> Now, I expect there to be some problem with digital ISDN-calls from 
> Germany to Mauritius or vice-versa and therefore thought of changing
the
> bearer-cap on outgoing calls to speech then; with "isdn incoming-voice 
> data" on the called router it should work (?) but:
> 
> how do I change the dialout-router to use bearer "speech" instead of 
> digital
> 
> Any hint would be appreciated, I found nothing by googling so far..
> (ok, it's also insane to set the "wrong" bearer-cap but I hope it
helps in
> this case)
> 
> Michael
> 
> 
> BTW: if this works, another interesting thing might be, this would 
> probably help to "workaround" a well-known flat-tariff in Germany
which
> allows only voicecalls by policy ;)
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/