[c-nsp] IOS image upload from VRF

[Rodney Dunn]

CSCea89507
Externally found enhancement defect: Resolved (R)
TFTP/FTP is not supported over VRF

You need an image where we made TFTP/FTP VRF aware. 

Rodney

On Fri, Aug 27, 2004 at 12:42:50AM +0300, Volodymyr Yakovenko wrote:
> On Thu, Aug 26, 2004 at 03:45:24PM -0400, Jared Mauch wrote:
> >On Thu, Aug 26, 2004 at 10:41:59PM +0300, Volodymyr Yakovenko wrote:
> >> Hello!
> >> 
> >>  I am trying to figure out how to upload new IOS into 7200vxr running
> >>  12.2(18)S5 from tftp/ftp/rcp server situated not in GLOBAL but in VRF.
> >> 
> >>  First of all there is no possibility to specify VRF in exec's copy command
> >>  (at least in 12.2(18)S5).
> >> 
> >>  Secondly IOS does not support tftp server write functionality.
> >> 
> >>  It also looks like IOS rsh/rcp server functionality can not be accessed from 
> >>  VRF iface.
> >>  
> >>  Is there any other way to upload new IOS image into router from host, 
> >>  accessible from VRF?
> >
> >	can you do this:
> >
> >	ip rcmd source-interface <loopback-inside-vrf>
> >
> >	then try your rcp copy again?
> 
> RCP (and only RCP) works. Tnx for the pointer!
> 
> RSH (which is also enabled) fails to work with the following message:
> 
> Aug 28 00:25:13.379: %TCP-2-INVALIDTCB: Invalid TCB pointer: 0x2277D8C0
> -Process= "TCP Remote Shell", ipl= 0, pid= 128
> -Traceback= 607C8E94 607CD5F0 608267D0 606B991C 606B9908
> 
> -- 
> Regards,
> Volodymyr.
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/