[c-nsp] Pix Support NAT Traversal

[Thomas Kernen]

IIRC NAT Traversal was introduced in 6.3.. I use it in 6.3.4 for VPN
access for sure and it actually works

Thomas

----- Original Message ----- 
From: "Alex Foster" <afoster at gammatelecom.com>
To: <cisco-nsp at puck.nether.net>
Sent: Monday, September 06, 2004 12:24 PM
Subject: [c-nsp] Pix Support NAT Traversal


I am currently running version 6.2(2) on our existing PIX cluster - but
am having a few issues with SIP call-setup - can anybody tell me if the
version I am running supports SIP Nat Traversal - if so is there any
additional config that I require other than the fixup for SIP 5060.  I
have both public and privately configured SIP phones and find at the
moment I only get one way speech.

Thanks in advance

Alex


The information in this e-mail and any attachments is confidential and
may be subject to legal professional privilege. It is intended solely
for the attention and use of the named addressee(s). If you are not the
intended recipient, or person responsible for delivering this
information to the intended recipient, please notify the sender
immediately. Unless you are the intended recipient or his/her
representative you are prohibited from, and therefore must not, read,
copy, distribute, use or retain this message or any part of it. The
views expressed in this e-mail may not represent those of Gamma Telecom.

This message has been scanned for viruses by MailController
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/