[c-nsp] 2611xm slowed to crawl, ip based filter...

[Church, Chuck]

Is this along the same lines as the 'turbo' or 'compiled' ACLs on the
PIX and distributed routers? 


Chuck Church
Lead Design Engineer
CCIE #8776, MCNE, MCSE
Netco Government Services - Design & Implementation
1210 N. Parker Rd.
Greenville, SC 29609
Home office: 864-335-9473
Cell: 703-819-3495
cchurch at netcogov.com  <-note new address!
PGP key: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x4371A48D


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Niels Bakker
Sent: Wednesday, September 08, 2004 11:18 AM
To: Rodney Dunn
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] 2611xm slowed to crawl, ip based filter...

Rodney,

* rodunn at cisco.com (Rodney Dunn) [Wed 08 Sep 2004, 17:13 CEST]:
> You should also consider going to 12.3(4)T or
> later code that has the new TRIE based ACL's.
> They are much faster lookups.

Does that also apply to platforms besides the 2611XM?

Thanks,


	-- Niels.

-- 
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


----------------------------------------------------------------------------
 NOTE: As of 8/1/2004 my email address has changed to cchurch at netcogov.com
----------------------------------------------------------------------------