[c-nsp] like an "AT" command

[Eric Osborne]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1



Lucas Iglesias wrote:

| Hi all,
|
| I believe I've read once about an IOS command like the Unix "at", but at a
| glance, it seems to be missing or that I was reading something else ...
| What I need to do is to schedule certain configuration commands (a quite
| short script). Do you know if is there an easy way to do it, besides the
| well-known solution of scheduling a the tftp upload?

The only IOS-based 'at'-like thing I know of is under reload:

gsr5#reload ?
~  /noverify    Don't verify file signature before reload.
~  /verify      Verify file signature before reload.
~  LINE         Reason for reload
~  at           Reload at a specific time/date
~  cancel       Cancel pending reload
~  in           Reload after a time interval
~  slot         Slot number card
~  standby-cpu  Standby RP
~  <cr>


It's really useful for some things, but I don't think it helps you here.
You could check out
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_2/gt_tcl.htm
and see if it helps you, but I've never messed with it so I don't know what it
does.




eric

|
| Thanks !
| _______________________________________________
| cisco-nsp mailing list  cisco-nsp at puck.nether.net
| https://puck.nether.net/mailman/listinfo/cisco-nsp
| archive at http://puck.nether.net/pipermail/cisco-nsp/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (MingW32)

iD8DBQFBP4oEYR4YGS5xhWIRAiczAJ9u1DGpdm5ix4PvUT3lfsjgK1qs4ACdEkr6
2ThBkmiI8pbtIN6L3o28UTg=
=Fgqx
-----END PGP SIGNATURE-----