[c-nsp] Correction: General PRI & BRI compatibility: E1connection problems]

[Mehmet Ali Suzen]

> Did you check the clocking between the E1 and the MAX?

Only clocking adjustment on Ascend is Clock YES or NO.
Modems are HDSL and it is configured by telco.

Ascend PRI port ===modem HDSL=====modem HDSL ==== PRI telco side

any idea. We are planning to remove BRIs and test with only PRI.
Is there any other way?

>
> 2. and 3. seems to suggest sync problems between the two equipments.
>
> Vincent
>
>>  2. When we call PRI lines with an analog modem the
>> connection appears to
>> be ok after
>>     a long handshaking. So, connection takes too long or not connected
>> after a long
>>     handshaking period.
>>
>>  3. After we connected to PRI lines pinging to DNS server,
>> (which is on
>> the same switch as ascend)
>>     has some lost about 20 per cent.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>