[c-nsp] PA-POS-2OC3

[Ian Dickinson]

Cheaper than PA-MC-STM-1 would be nice, but this is the card you
need for this.  Channelised cards always cost a lot more than
normal cards, even if the extra margin isn't fully justified.
PA-MC-STM-1 does work pretty well, though you might be surprised
when you can't fill up the bandwidth with a mix of NxDS0 & E1.

Ian

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net]On Behalf Of Volodymyr
Yakovenko
Sent: 20 September 2004 22:34
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] PA-POS-2OC3


Hello!

 Can anyone comment the possibility to use PA-POS-2OC3 with not entire
 STM1, but with several VC-12's? 

 I do need only one group of VC-12 per STM1 port and looking for something
 cheaper than PA-MC-STM-1.

-- 
Regards,
Volodymyr.

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/