[c-nsp] Troubleshooting Lag between GigE interfaces

[Paul Stewart]

> Nope.  We do ACL's in the distributed path.
> Only caveat there is named ACL's in 12.0S are not supported
> in the dCEF path.
> 

Ah right.. sorry my mistake...
> 
> > would that be causing it to punt down?
> 
> This doesn't have anything to do with punts.  Here dCEF isn't
> even up to the VIP in slot 8 and 9.
> 
> For some reason dCEF got disabled to those slots.
> You would have to have the logs from when it got disabled
> to know why.
> 
> How much memory are on those cards?
> 'sh diag'
> 
32 Meg on each card..

> 
> You can try to re-enable it via: clear cef linecard
> 
> or do:
> 
> 
> confi t
> ip cef  <that converts everything to RSP based CEF switching
> ip cef distributed <that will turn dCEF back on for the box.
> 
> You have to get dCEF sync'd up to the cards first.
> That should say "up and sync, table-up" in sh cef linecard.
> 

Tried this... 

They still show as disabled.. weird.. must be my configuration I'm
guessing.. but not sure why...

Paul