[c-nsp] Troubleshooting Lag between GigE interfaces
Paul Stewart
pauls at nexicom.net
Thu Sep 23 12:14:21 EDT 2004
Hmm... I think we're getting warmer..:)
Here's the "sh diag":
gw-7513#sh diagbus
Slot 3:
Physical slot 3, ~physical slot 0xC, logical slot 3, CBus 0
Microcode Status 0x0
Master Enable, LED, WCS Loaded
Board is analyzed
EEPROM format version 1
FSIP controller, HW rev 1.01, board revision C0
Serial number: 03496276 Part number: 73-1126-05
Test history: 0x00 RMA number: 00-00-00
Flags: cisco 7000 board; 7500 compatible
EEPROM contents (hex):
0x20: 01 07 01 01 00 35 59 54 49 04 66 05 00 00 00 00
0x30: 60 00 00 00 FF 00 00 00 00 00 00 00 00 00 00 00
Slot database information:
Flags: 0x4 Insertion time: 0x4380 (1w1d ago)
Slot 6:
EEPROM format version 1
Route/Switch Processor 4, HW rev 1.03, board revision C0
Serial number: 15308129 Part number: 73-1689-05
Test history: 0x00 RMA number: 00-00-00
Flags: cisco 7000 board; 7500 compatible
EEPROM contents (hex):
0x20: 01 1A 01 03 00 E9 95 61 49 06 99 05 00 00 00 00
0x30: 60 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00
Slot 7:
EEPROM format version 1
Route/Switch Processor 4, HW rev 1.03, board revision C0
Serial number: 15308150 Part number: 73-1689-05
Test history: 0x00 RMA number: 00-00-00
Flags: cisco 7000 board; 7500 compatible
EEPROM contents (hex):
0x20: 01 1A 01 03 00 E9 95 76 49 06 99 05 00 00 00 00
0x30: 60 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
Slot 8:
Physical slot 8, ~physical slot 0x7, logical slot 8, CBus 1
Microcode Status 0x4
Master Enable, LED, WCS Loaded
Board is analyzed
Pending I/O Status: None
EEPROM format version 1
GEIP controller, HW rev 2.03, board revision A0
Serial number: 18950511 Part number: 73-2167-06
Test history: 0x00 RMA number: 00-00-00
Flags: cisco 7000 board; 7500 compatible
EEPROM contents (hex):
0x20: 01 21 02 03 01 21 29 6F 49 08 77 06 00 00 00 00
0x30: 50 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
Slot database information:
Flags: 0x4 Insertion time: 0x4380 (1w1d ago)
Controller Memory Size: 32 MBytes DRAM, 4096 KBytes SRAM
PA Bay 1 Information:
Gigabit-Ethernet PA, 1 ports
EEPROM format version 1
HW rev 1.00, Board revision A1
Serial number: 17941328 Part number: 73-3144-03
--Boot log begin--
Cisco Internetwork Operating System Software
IOS (tm) VIP Software (SVIP-DW-M), Version 12.3(10), RELEASE SOFTWARE
(fc3)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Mon 16-Aug-04 21:50 by kellythw
Image text-base: 0x60010AE4, data-base: 0x60560000
--Boot log end--
Slot 9:
Physical slot 9, ~physical slot 0x6, logical slot 9, CBus 1
Microcode Status 0x4
Master Enable, LED, WCS Loaded
Board is analyzed
Pending I/O Status: None
EEPROM format version 1
GEIP controller, HW rev 2.02, board revision C0
Serial number: 13943816 Part number: 73-2167-05
Test history: 0x00 RMA number: 00-00-00
Flags: cisco 7000 board; 7500 compatible
EEPROM contents (hex):
0x20: 01 21 02 02 00 D4 C4 08 49 08 77 05 00 00 00 00
0x30: 60 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
Slot database information:
Flags: 0x4 Insertion time: 0x4380 (1w1d ago)
Controller Memory Size: 32 MBytes DRAM, 4096 KBytes SRAM
PA Bay 1 Information:
Gigabit-Ethernet PA, 1 ports
EEPROM format version 1
HW rev 1.00, Board revision A1
Serial number: 22598189 Part number: 73-3144-03
--Boot log begin--
Cisco Internetwork Operating System Software
IOS (tm) VIP Software (SVIP-DW-M), Version 12.3(10), RELEASE SOFTWARE
(fc3)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Mon 16-Aug-04 21:50 by kellythw
Image text-base: 0x60010AE4, data-base: 0x60560000
--Boot log end--
Slot 10:
Physical slot 10, ~physical slot 0x5, logical slot 10, CBus 1
Microcode Status 0x4
Master Enable, LED, WCS Loaded
Board is analyzed
Pending I/O Status: None
EEPROM format version 1
VIP2 R5K controller, HW rev 2.03, board revision A0
Serial number: 17944577 Part number: 73-2167-06
Test history: 0x00 RMA number: 00-00-00
Flags: cisco 7000 board; 7500 compatible
EEPROM contents (hex):
0x20: 01 1E 02 03 01 11 D0 01 49 08 77 06 00 00 00 00
0x30: 50 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
Slot database information:
Flags: 0x4 Insertion time: 0x4380 (1w1d ago)
Controller Memory Size: 128 MBytes DRAM, 8192 KBytes SRAM
PA Bay 0 Information:
Fast-Ethernet PA, 2 ports, 100BaseTX-ISL
EEPROM format version 1
HW rev 2.00, Board revision B0
Serial number: 16413067 Part number: 73-2618-03
PA Bay 1 Information:
Fast-Ethernet PA, 2 ports, 100BaseTX-ISL
EEPROM format version 1
HW rev 1.01, Board revision A0
Serial number: 14073635 Part number: 73-2618-02
--Boot log begin--
Cisco Internetwork Operating System Software
IOS (tm) VIP Software (SVIP-DW-M), Version 12.3(10), RELEASE SOFTWARE
(fc3)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Mon 16-Aug-04 21:50 by kellythw
Image text-base: 0x60010AE4, data-base: 0x60560000
--Boot log end--
Slot 11:
Physical slot 11, ~physical slot 0x4, logical slot 11, CBus 1
Microcode Status 0x4
Master Enable, LED, WCS Loaded
Board is analyzed
Pending I/O Status: None
EEPROM format version 1
VIP2 R5K controller, HW rev 2.03, board revision A0
Serial number: 19425523 Part number: 73-2167-06
Test history: 0x00 RMA number: 00-00-00
Flags: cisco 7000 board; 7500 compatible
EEPROM contents (hex):
0x20: 01 1E 02 03 01 28 68 F3 49 08 77 06 00 00 00 00
0x30: 50 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
Slot database information:
Flags: 0x4 Insertion time: 0x4380 (1w1d ago)
Controller Memory Size: 128 MBytes DRAM, 8192 KBytes SRAM
PA Bay 0 Information:
Fast-Ethernet PA, 2 ports, 100BaseTX-ISL
EEPROM format version 1
HW rev 2.00, Board revision B0
Serial number: 16778522 Part number: 73-2618-03
--Boot log begin--
Cisco Internetwork Operating System Software
IOS (tm) VIP Software (SVIP-DW-M), Version 12.3(10), RELEASE SOFTWARE
(fc3)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Mon 16-Aug-04 21:50 by kellythw
Image text-base: 0x60010AE4, data-base: 0x60560000
--Boot log end--
Slot 31 (virtual):
EEPROM format version 1
Chassis Interface, HW rev 1.01, board revision C0
Serial number: 18002258 Part number: 73-1306-02
Test history: 0x00 RMA number: 00-00-00
Flags: cisco 7000 board
EEPROM contents (hex):
0x20: 01 10 01 01 01 12 B1 52 49 05 1A 02 00 00 00 00
0x30: 60 00 00 00 FF 00 00 00 00 00 00 00 00 00 00 00
On Thu, 2004-09-23 at 12:03, Rodney Dunn wrote:
> How many routes do you have on the box.
>
> 32M isn't nearly enough to hold the full BGP
> table in distributed mode.
>
> Can you post a 'sh diag' for the box here?
>
> I can't remember, do we even ship a GEIP with
> 32M of memory?
>
> Here is the one in my lab:
>
> Slot 0:
> Physical slot 0, ~physical slot 0xF, logical slot 0, CBus 0
> Microcode Status 0x4
> Master Enable, LED, WCS Loaded
> Board is analyzed
> Pending I/O Status: None
> EEPROM format version 1
> VIP4-80 RM7000 controller, FRU: VIP4-80=, HW rev 2.04, board revision A0
> Serial number: 18629786 Part number: 73-3143-10
> Test history: 0x00 RMA number: 00-00-00
> Flags: cisco 7000 board; 7500 compatible
>
> EEPROM contents (hex):
> 0x20: 01 22 02 04 01 1C 44 9A 49 0C 47 0A 00 00 00 00
> 0x30: 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> Slot database information:
> Flags: 0x4 Insertion time: 0x32EC (1w3d ago)
>
> Controller Memory Size: 256 MBytes CPU SDRAM, 64 MBytes Packet SDRAM
>
> PA Bay 0 Information:
> Gigabit-Ethernet PA(Dual-Wide), 1 ports, FRU: PA-GE=
> EEPROM format version 4
> HW rev 0.02, Board revision A0
> Serial number: FAA045107SV Part number: 73-4520-03
>
>
> it's 256 Meg of DRAM on the GEIP (aka: vip/pa fixed combo).
>
> On Thu, Sep 23, 2004 at 11:58:59AM -0400, Paul Stewart wrote:
> > > Nope. We do ACL's in the distributed path.
> > > Only caveat there is named ACL's in 12.0S are not supported
> > > in the dCEF path.
> > >
> >
> > Ah right.. sorry my mistake...
> > >
> > > > would that be causing it to punt down?
> > >
> > > This doesn't have anything to do with punts. Here dCEF isn't
> > > even up to the VIP in slot 8 and 9.
> > >
> > > For some reason dCEF got disabled to those slots.
> > > You would have to have the logs from when it got disabled
> > > to know why.
> > >
> > > How much memory are on those cards?
> > > 'sh diag'
> > >
> > 32 Meg on each card..
> >
> > >
> > > You can try to re-enable it via: clear cef linecard
> > >
> > > or do:
> > >
> > >
> > > confi t
> > > ip cef <that converts everything to RSP based CEF switching
> > > ip cef distributed <that will turn dCEF back on for the box.
> > >
> > > You have to get dCEF sync'd up to the cards first.
> > > That should say "up and sync, table-up" in sh cef linecard.
> > >
> >
> > Tried this...
> >
> > They still show as disabled.. weird.. must be my configuration I'm
> > guessing.. but not sure why...
> >
> > Paul
> >
More information about the cisco-nsp
mailing list