[c-nsp] QoS Question

[Chapman, Matthew]

Frame relay T1s using EIGRP.

 

-matt chapman

 

________________________________

From: Cheung, Rick [mailto:Rick.Cheung at nextelpartners.com] 
Sent: Thursday, September 23, 2004 12:01 PM
To: Chapman, Matthew; cisco-nsp at puck.nether.net
Cc: Sagon, Keith C.
Subject: RE: [c-nsp] QoS Question

 

        Are they frame T1s, or point to points? I dont recall if CBWFQ
supports point to point T1s, with encapsulation HDLC.

        CBWFQ may be the answer, where you can assign a certain amount
of bandwidth for your classB destinations, and have a default class for
everything else. 

 

Rick Cheung 

 

-----Original Message----- 
From: Chapman, Matthew [mailto:chapmam2 at ocps.k12.fl.us] 
Sent: Thursday, September 23, 2004 8:28 AM 
To: cisco-nsp at puck.nether.net 
Cc: Sagon, Keith C. 
Subject: [c-nsp] QoS Question 

 

Hello, 

I have a basic QoS question.  I have a hub and spoke topology, all T1 
connections.  Some major applications are being done via http at the 
hub.  We have a class B that we use mostly for servers, and no remote 
locations use any of the class B.  We have a few critical websites that 
are on the internet just beyond our hub that the remote locations need 
access to above all other sites. 

I would like to make a QoS policy ingress on the router at the remote 
location that gives a high priority to anything in the class B (mostly 
to insure Microsoft AD does not break etc and our new web apps work) and

then give a lower priority to a few select websites on the internet and 
then everything else fall into "if there is enough bandwidth left" 
category. 

Any suggestions on this?  Is this the right approach?  

Thanks, 
Matt Chapman 
  
-- 
Matthew Chapman 
Network Engineer 
"Hard work, sacrifice and focus will never show up in tests." 
         - Lance Armstrong 

 

_______________________________________________ 
cisco-nsp mailing list  cisco-nsp at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-nsp 
archive at http://puck.nether.net/pipermail/cisco-nsp/ 

This message, including any attachments, contains confidential
information intended for a specific
individual and purpose and is protected by law. If you are not the
intended recipient, please contact
sender immediately by reply e-mail and destroy all copies.

You are hereby notified that any disclosure, copying, or distribution of
this message, or the taking

of any action based on it, is strictly prohibited.

WARNING: Computer viruses can be transmitted via email. The recipient
should check this email
and any attachments for the presence of viruses. The sender accepts no
liability for any damage

caused by any virus transmitted by this email. E-mail transmission
cannot be guaranteed

to be secure or error-free as information could be intercepted,
corrupted, lost, destroyed, arrive

late or incomplete, or contain viruses. The sender therefore does not
accept liability for any errors

or omissions in the contents of this message, which arise as a result of
e-mail transmission.