[c-nsp] PA-2FE-TX speed

[Craig Spiers]

I have a PA-4E, and its running Full duplex fine..  

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Daniel Roesen
Sent: Tuesday, 28 September 2004 11:44 a.m.
To: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] PA-2FE-TX speed

On Mon, Sep 27, 2004 at 07:23:16PM -0400, Andy Dills wrote:
> > There are 4 and 8 port 10 Mb/s-only port adapters available. I think 
> > they are the PA-4E and PA-8E but I'm not sure if I'm remembering 
> > those part numbers correctly.
> 
> Yes, and they can be acquired for well under $200 US, since he doesn't 
> need the VXR compatible version. Given that he can add routed 
> interfaces to his router for a similar price as any other media 
> conversion solution (and without an additional power supply), I can't 
> imagine choosing a different solution than the PA-4E or PA-8E.

Attention: PA-[48]E do half-duplex only if I remember correctly!


Regards,
Daniel

--
CLUE-RIPE -- Jabber: dr at cluenet.de -- dr at IRCnet -- PGP: 0xA85C8AA0
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/