[c-nsp] Catalyst 6500 won't boot Ethernet Switching Modules

Dave Breiland dave at opsource.net
Tue Sep 28 16:38:14 EDT 2004


My guess would be the SUP2 module or bad backplane...

Dave

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of jc hall
Sent: Tuesday, September 28, 2004 1:20 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Catalyst 6500 won't boot Ethernet Switching Modules

Can anybody provide some insight to this problem?  I am piecing together a
Catalyst 6500 with a SUP2/MSFC2 and several Ethernet modules both 6248s and
6348s.  All of this hardware was purchased gray market.  The SUP2 will boot
the CatOS image when no other modules are installed in the chassis.  After
it is loaded and running and I insert an Ethernet module, it does not boot
the blade nor is it recognized in any way.

 

If I boot the switch with an Ethernet module inserted, it never fully boots.
Here is an example of the last attempt with a ws-x6248 installed in Slot3:

 

rommon 2 > boot bootflash:cat6000-sup2k8.7-5-1.bin

 

Self decompressing the image :
############################################################################
############################################################################
############################################################################
############################################################################
############################################################################
############################################################################
############################################################################
############################################################################
############################################################################
#################################### [OK]

 

 

System Power On Diagnostics

DRAM Size ..........................512 MB

Testing DRAM .......................Passed

Verifying Text Segment .............Passed

NVRAM Size .........................512 KB

Level2 Cache .......................Present

Level3 Cache .......................Present

System Power On Diagnostics Complete

 

Currently running ROMMON from S (Gold) region

Boot image: bootflash:cat6000-sup2k8.7-5-1.bin

 

Bus Error Exception (data) occurred on Sep 28 2004 12:04:19

Software version = 7.5(1)

Process ID #b, Name = PortConfig-1

process stack top = 8ffee970, stack pointer = 8ffee680

cause = 0000001c

Bus Error Exception (data) exception happened

    EPC: 80BE1088

    Stack content:

    sp+00: 8BD46900 00000000 00000000 809FA648

    sp+10: A2E23FF0 82E1FCA4 00000000 00000000

    sp+20: 00000000 809FA30C 000000CC 00000000

    sp+30: 00000000 82E1FC84 00000000 00000000

    sp+40: 809FC314 809FC2E8 00000010 00000000

    sp+50: 00000000 00000000 80812980 8081294C

    sp+60: 00000001 00000003 00000001 0000000C

    sp+70: 00000000 00000066 00000000 000000ED

    sp+80: 8FFEE708 8080D464 00000001 00000000

    sp+90: 000493E0 808BCFD8 808BCFD8 808BCFD8

    sp+A0: 00000000 00000001 00000000 000493E0

    sp+B0: 808BCFD8 808BCFD8 808BCFD8 808BCFD8

    sp+C0: 808BCFD8 808BCFD8 808BCFD8 808BCFD8

    sp+D0: 808BCFD8 808BCFD8 808BCFD8 808BCFD8

    sp+E0: 808BCFD8 808BCFD8 808BCFD8 808BCFD8

    sp+F0: 808BCFD8 808BCFD8 808BCFD8 808BCFD8

    Register content:

      Status: FFFFFF83    Cause: 8100501C

AT: 81830000

          V0: 00000000       V1: 00000000

          A0: 8BD46928       A1: 00000000

          A2: 00000050       A3: 00000000

          T0: 8BD46914       T1: 34040021

          T2: FFFFFFE0       T3: 00000003

          T4: 00000000       T5: 00000000

          T6: 01000000       T7: 0001C8D4

          S0: 00000200       S1: 1FFFFFFF

          S2: E0000000       S3: 00000000

          S4: 00000000       S5: 00000000

          S6: 00000000       S7: 00000000

          T8: 00066EDE       T9: FFFFFFFF

          K0: A0000000       K1: A0EA0308

          GP: 8152A9A0       SP: 8FFEE680

          S8: 8FFEE6E0       RA: 809FAB04

        HIGH: 00000EFC      LOW: 00000063

    BADVADDR: C189C8FA  ERR EPC: 80BE1080

Call Trace(bottom of the stack to top):

0x809fa640:     jal 0x809fd6cc

0x809fa304:     jal 0x809fa97c

0x809fc30c:     jal 0x809fa2a0

0x809fc2e0:     jal 0x808c5b90

0x80812978:     jal 0x809fc2c8

0x80812944:     jal 0x805178bc

0x8080d45c:     jal 0x808126f4

0x808bf14c:     jalr r2ÿ

System Bootstrap, Version 7.1(1)

Copyright (c) 1994-2001 by cisco Systems, Inc.

*** Mistral Interrupt on line 2 ***

IO bus interrupt due to illegal addr, no ack, etc 

PC = 0xbfc1234c, Cause = 0x1000, Status Reg = 0x30419003

ROM Monitor Can Not Recover From Exception

A Board Reset Is Issuedþ

 

Do I have a software problem, Ethernet module problem with all my blades or
a possible backplane issue?

 

Thanks,

 

________________________


J.C. Hall

Network Administrator

cybertrails

"providing internet solutions"

623.434.6066 Desk

623.764.8726 Mobile

jc.hall at cybertrails.net

http:// <http://www.cybertrails.com> www.cybertrails.com

________________________

 

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/





More information about the cisco-nsp mailing list