[c-nsp] Load Generation Tool

[Church, Chuck]

TTCP will work, assuming your routers support it.  There are free
clients available for PC OS'es as well.  If it's a low enough bandwidth
you're trying to test, something like
http://www.dslreports.com/speedtest might do the trick. 


Chuck Church
Lead Design Engineer
CCIE #8776, MCNE, MCSE
Netco Government Services - Design & Implementation
1210 N. Parker Rd.
Greenville, SC 29609
Home office: 864-335-9473
Cell: 703-819-3495
cchurch at netcogov.com
PGP key: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x4371A48D


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of McLean Pickett
Sent: Tuesday, April 05, 2005 12:00 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Load Generation Tool


Hello -

Can anyone recommend a free tool to test throughput. I would like to
verify that I am being allocated my CIR.

Response such as "try ping" not necessary.

Thanks,
McLean
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/