[c-nsp] Cisco VIP2-50+PA-2FE-TX second ethernet port bug

[Rodney Dunn]

I think I asked about this before and nobody resonded.

What is happening?
Vague comments don't help me.

The only think I know about is:

CSCsa50332
Externally found moderate defect: Assigned (A)
VIP4-80 with PA-2FE-TX may crash with parity error

I've seen this with one customer and we've tried
very hard to recreate this in the lab and have
not been able to do it yet.

Rodney


On Fri, Apr 08, 2005 at 09:43:24AM +0200, Gert Doering wrote:
> Hi,
> 
> On Thu, Apr 07, 2005 at 07:37:32PM -0700, Chris Cappuccio wrote:
> > Does anyone have the bugid for the bug where turning on the second 
> > ethernet port on a PA-2FE-TX crashes the VIP2-50 that its in, and
> > ultimately causes the rest of the router to start to fuck up????
> 
> You're experiencing this as well?  Great, it means "I'm not alone".
> 
> I don't have a BugID, unfortunately, as the box in question doesn't
> have a Smartnet contract anymore.
> 
> We are running 12.0(27)S2, and I haven't tried more recent versions - this
> box is sitting in a remote location, and I don't feel like experimenting
> with it without being able there to give it a good kick if needed...
> 
> gert
> -- 
> USENET is *not* the non-clickable part of WWW!
>                                                            //www.muc.de/~gert/
> Gert Doering - Munich, Germany                             gert at greenie.muc.de
> fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/