[c-nsp] Cisco VIP2-50+PA-2FE-TX second ethernet port bug

[Christian Lox]

Gert Doering wrote:

> As far as I could see, it crashes only when you put actual traffic load
> on the second FE port.  If it's just "no shut" and doing nothing more
> than a few CDP and Ethernet loopback packets, it doesn't crash.
> 
> Startup a BGP session, run a big ping -> boom.
> 

I tried several times but could not reproduce.

This is 12.0(30)S on quite ancient hardware:
PA-2FEISL-TX=
HW rev 2.00, Board revision B0

The main difference is the PA is still on VIP2-40.

Christian