[c-nsp] VAM2+ problem

[morph]

Hi all

I have a 7206 VXR router with a NPE G1 processor.
I have a VAM2+ inserted and i see an error int he boot process :

"System Bootstrap, Version 12.3(4r)T1, RELEASE SOFTWARE (fc1)
 TAC Support: http://www.cisco.com/tac
 Copyright (c) 2003 by cisco Systems, Inc.
 C7200 platform with 524288 Kbytes of main memory
 
 
 Readonly ROMMON initialized
 
 Self decompressing the image : 
########################################################################## 
[OK]
 
 %PA-3-NOTSUPPORTED: PA in slot1 (Unknown (type 1200)) is not supported 
on this image. 
            Please issue "show diag" in fully loaded IOS image
            to get the PA's information and verify if it is supported
            by this image, a newer version may be needed.
 %PA-3-DEACTIVATED: port adapter in bay [1] powered off."


But when the IOS is loaded (c7200-ik9o3s-mz.123-12a.bin) it seems it´s ok:

#sh pas vam interface
VPN Acceleration Module Version II+ in slot : 1
        Statistics for Hardware VPN Module since the last clear
         of counters 75 seconds ago
                      0 packets in                           0 packets out
                      0 bytes in                             0 bytes out
                      0 paks/sec in                          0 paks/sec out
                      0 Kbits/sec in                         0 Kbits/sec out
                      0 pkts compressed                      0 pkts not 
compressed
                      0 bytes before compress                0 bytes 
after compress
                  1.0:1 compression ratio                1.0:1 overall
                      7 commands out                         7 commands 
acknowledged
                Last 5 minutes:
                      0 packets in                           0 packets out
                      0 paks/sec in                          0 paks/sec out
                      0 bits/sec in                          0 bits/sec out

        Errors:
           ppq full errors         :        0   ppq rx errors           
:        0
           cmdq full errors        :        0   cmdq rx errors          
:        0
           ppq down errors         :        0   cmdq down errors        
:        0
           no buffer               :        0   replay errors           
:        0
           dest overflow           :        0   authentication errors   
:        0
           Other error             :        0   RNG self test fail      
:        0


Do you have any tip of what´s wrong? (it it´s something wrong :P  )


cheers!


Javier