[c-nsp] spd mode aggressive
LUCAS, Raymond, FM
Raymond.LUCAS at rbos.com
Wed Apr 13 09:01:12 EDT 2005
> -----Original Message-----
> From: Oliver Boehmer (oboehmer) [mailto:oboehmer at cisco.com]
> Sent: 13 April 2005 11:32
> To: LUCAS, Raymond, FM; cisco-nsp at puck.nether.net
> Subject: RE: [c-nsp] spd mode aggressive
>
> LUCAS, Raymond, FM <> wrote on Wednesday, April 13, 2005 11:48 AM:
>
> > Does anyone have experience with this turned on? The particular
> > routers we want to run it on are 7200s with 12.2(8)T5.
>
> SPD aggressive is being used in many (ISP) networks I'm aware
> of. I have
> not heard of any complaints..
Thanks for the info. Sounds promising.
> > The documentation for this is, ah, sparse to say the least.
> >
> http://www.cisco.com/en/US/products/hw/routers/ps167/products_
> tech_note09186a008012fb87.shtml
>
> Hmm, which information did you miss? Sounds pretty complete to me (i.e.
> drop malformed pkts instead of punting them and generating ICMP msgs)..
>
> oli
Yes, the document in question is complete... I was more refering to the lack
of anything much else on CCO. Just six results for "spd mode"
I just get cautious about commands that aren't documented in the 'main'
command references or in the CLI. Even though the command was added to
11.3/11.1CC which is a little while ago now.
The comment about "punting them and generating ICMP msgs" - does this apply
to all platforms or just the GSR? And does this apply to any sort of
strangeness in the TCP/IP header or just the address?
Cheers,
Ray
***********************************************************************************
The Royal Bank of Scotland plc. Registered in Scotland No 90312. Registered Office: 36 St Andrew Square, Edinburgh EH2 2YB.
Authorised and regulated by the Financial Services Authority
This e-mail message is confidential and for use by the
addressee only. If the message is received by anyone other
than the addressee, please return the message to the sender
by replying to it and then delete the message from your
computer. Internet e-mails are not necessarily secure. The
Royal Bank of Scotland plc does not accept responsibility for
changes made to this message after it was sent.
Whilst all reasonable care has been taken to avoid the
transmission of viruses, it is the responsibility of the recipient to
ensure that the onward transmission, opening or use of this
message and any attachments will not adversely affect its
systems or data. No responsibility is accepted by The Royal
Bank of Scotland plc in this regard and the recipient should carry
out such virus and other checks as it considers appropriate.
Visit our websites at:
http://www.rbs.co.uk/CBFM
http://www.rbsmarkets.com
********************************************************************************
More information about the cisco-nsp
mailing list