[c-nsp] switching off MPLS penultimate pop hopping

[Harold Ritter (hritter)]

Volodymyr,

You can use the "mpls ldp explicit-null" command on the PE to advertise an
explicit null label instead of the default implicit null. This basically
forces the penultimate router to forward the packets to the egress PE using
a label value of 0.


Harold.

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Volodymyr Yakovenko
Sent: Thursday, April 21, 2005 1:37 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] switching off MPLS penultimate pop hopping

Hello!

 Is there any possibility to force particular Cisco PE router to  perform
the FIB lookup in addition to LFIB lookup during during packet  forwarding
from MPLS interface to CE?

 As far I understand it means to disable 'MPLS penultimate pop hopping'.

--
Regards,
Volodymyr.

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/