[c-nsp] IP conflict !!! How to avoid this....

[Gangasagar Amula]

But Rey...the command specified below is not working on my Catalyst 4006....

Secondly....can we have such commands to tell each port to learn ip from DHCP....only...

Which I think will avoid it completely.. 



Output for ref..
-------------------------------------------------------------------
Switch> (enable) sh mac-address-table
Unknown command "show mac-address-table".  Use 'show help' for more info.
Switch> (enable)



--------------------------------------------------------------------
 Switch> (enable) sh mac

Port     Rcv-Unicast          Rcv-Multicast        Rcv-Broadcast
-------- -------------------- -------------------- --------------------
 1/1                        0                    0                    0
 1/2                        0                    0                    0
 3/1                   299606                  339                 1232
 3/2                   345210                   59                48707
 3/3                        0                    0                    0
 3/4                   293978                  987                 2363
 3/5                   912358                    0                 1485
 3/6                   110531                   47                 1629
 3/7                   147217                   59                 2560
 3/8                    47632                  589                 1446
 3/9                    80619                   65                 2574
 3/10                   20484                   21                  624
 3/11                  153825                   40                 2085
 3/12                   93350                   40                 1966
 3/13                   59242                   65                 1960
 3/14                   22111                   43                 1151
 3/15                   76156                   40                 3362
 3/16                  163551                   28                 4378
 3/17                  109236                   52                 2205
 3/18                  168167                   35                27848
-------------------------------------------------------------



On Tue, 26 Apr 2005 Rey Martin wrote :
>
>>Or can we identify the port number of the switch if we have the ip address ?
>>
>
>u should have the mac addr, rite?
>
>switch>sh mac-address-table | i aaaa.bbbb.cccc.dddd
>
>
>rey