[c-nsp] 28xx performance question

[Brian Vowell]

The 2821 has two built-in GbE ports.  It'll do a few hundred mbps if 
it's only routing and not inspecting.  A moderate IPS load along with 
three full BGP tables brought the performance down to approx 70 mbps.


--b

John Neiberger wrote:

>>>>"Dan Lockwood" <dlockwood at shastacoe.org> 4/27/05 9:27:25 AM >>>
>>>>        
>>>>
>>Can anyone point me to some performance metrics for the 2800 series. 
>>    
>>
>I
>  
>
>>need something that I can park a DS3 on.
>>    
>>
>
>If you want to go with a newer router, I think you have to get a 3845
>for a full DS3. If it doesn't have to be new, a 3660 would work well, as
>would a 7200 but now you're talking big bucks. The Cisco doc that I have
>says that a 2851 should be limited to terminating six T1/E1/xDSL
>circuits.
>
>HTH,
>John
>--
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/
>  
>