[c-nsp] PRI Call fails

[list]

Hi All,

I am having trouble getting a Cisco AS5300 to work.  I am using ISDN 
circuits from Cisco to my PBX. The PRI shows normal and the dchannel is up. 
But when i try to send call from PBX to Cisco I get the following error in 
the cisco.  I am using switch type as National. Using IOS 12.0(4)T1. Any 
ideas on how to fix?

Thanks,
Jon

Apr 27 20:32:41.079: ISDN Se2:23: RX <- INFOc sapi=0 tei=0 ns=7 nr=7 
i=0x0802000
80504038090A21803A983811E0283816C0200C3700A91393235353531323132
Apr 27 20:32:41.079: SETUP pd = 8 callref = 0x0008
Apr 27 20:32:41.083: Bearer Capability i = 0x8090A2
Apr 27 20:32:41.083: Channel ID i = 0xA98381
Apr 27 20:32:41.083: Progress Ind i = 0x8381 - Call not end-to-end ISDN,
may have in-band info
Apr 27 20:32:41.083: Calling Party Number i = 0x00, 0xC3, Plan:Unknown,
Type:Unknown
Apr 27 20:32:41.083: Called Party Number i = 0x91, '925551212', Plan:ISD
N, Type:International
Apr 27 20:32:41.083: ISDN Se2:23: TX -> RRr sapi=0 tei=0 nr=8
Apr 27 20:32:41.091: ISDN Se2:23: TX -> INFOc sapi=0 tei=0 ns=7 nr=8 
i=0x0802800
85A080280C1
Apr 27 20:32:41.091: RELEASE_COMP pd = 8 callref = 0x8008
Apr 27 20:32:41.091: Cause i = 0x80C1 - Bearer capability not implemente
d
Apr 27 20:32:41.099: ISDN Se2:23: RX <- RRr sapi=0 tei=0 nr=8