[c-nsp] HELP!!!!Aironet 1200 Problem Routing

[Eusebio López]

thanks to help me

I have solved the problem temporarily assign an IP from the secondary network as a secondary address on the default gateway.

I like to separate the networks by means of Vlans. could you send me any example simple to create multiple SSIDs and assign a unique VLAN per SSID????

Sincerely yours.


-----Mensaje original-----
De: Kristofer Sigurdsson [mailto:ks at rhi.hi.is] 
Enviado el: jueves, 28 de abril de 2005 17:46
Para: Eusebio López
CC: cisco-nsp at puck.nether.net
Asunto: Re: [c-nsp] HELP!!!!Aironet 1200 Problem Routing

Ahemm, a slight clearification...

On Thu, 2005-04-28 at 15:43 +0000, Kristofer Sigurdsson wrote:
> Hi,
> 
> On Thu, 2005-04-28 at 17:18 +0200, Eusebio López wrote:
> > First of all, excuse me, because my english is very poor. I hope it could be enough to explain that i want.
> > 
> > I have this problem:
> > 
> > I have a Cisco Access Point 1200 Aironet with Radius to which I connect to the AP by means of one pda. I have understood that the AP routing different networks.
> 
> True, the AP1200 can route different networks, but in order to 
> seperate them, you will need to create multiple SSIDs and assign a 
> unique VLAN per SSID.

The access point doesn't actually *route*, but it can seperate traffic using VLANs and then trunk them to a L3 device, which can route between the VLANs.

-- 
Kristófer Sigurðsson         | Tel: +354 525 4103 / MSN: ks at rhi.hi.is
Netsérfr./Network specialist | Reiknistofnun HÍ/University of Iceland