[c-nsp] E1 Twinax Cable Question:

[Ted Mittelstaedt]

On what kind of cabling is the E1 delivered on?

There isn't anything special about the krone block,
it is just a physical connection.  What matters is
how the E1 is coming in, how is it?

Ted

>-----Original Message-----
>From: cisco-nsp-bounces at puck.nether.net
>[mailto:cisco-nsp-bounces at puck.nether.net]On Behalf Of Ernest
>Sent: Wednesday, August 03, 2005 11:04 AM
>To: cisco-nsp at puck.nether.net
>Subject: [c-nsp] E1 Twinax Cable Question:
>
>
>Hello,
>
>We have some 3662s and some 2-port E1 NMs.The older e1 NMs had DB15
>connectors and had no in-built CSU/DSU.The new ones have RJ-48 
>connectors
>with direct connectivity to telco via the twinax cable for a balanced
>E1(which is what we use).
>
>My question is about this Twinax cable:
>
>Can strip the Tx and Rx ends of the Twinax cable and patch it 
>directly to
>the krone box where the E1 is patched?
>
>Ernest.
>
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/
>