[c-nsp] VWIC-2MFT-T1 w/ MLPPP

Cheung, Rick Rick.Cheung at nextelpartners.com
Fri Aug 19 14:42:48 EDT 2005


	Yep, works fine on 2620s, 3660s, 3640s on Frame and Point to
Point circuits, 12.2.2x, 12.3. We've tried the DI as well, no problems.



Thanks,
Rick Cheung

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of noc ops
Sent: Friday, August 19, 2005 12:30 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] VWIC-2MFT-T1 w/ MLPPP

Hi,

Has anyone used this WIC w/ Multilink PPP bundle? If so, any feedback
will be appreciated.

We are looking at using this WIC w/ 3725.


regards,
/virendra
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

This message, including any attachments, contains confidential information intended for a specific
individual and purpose and is protected by law. If you are not the intended recipient, please contact
sender immediately by reply e-mail and destroy all copies.
You are hereby notified that any disclosure, copying, or distribution of this message, or the taking
of any action based on it, is strictly prohibited.

WARNING: Computer viruses can be transmitted via email. The recipient should check this email
and any attachments for the presence of viruses. The sender accepts no liability for any damage
caused by any virus transmitted by this email. E-mail transmission cannot be guaranteed
to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive
late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors
or omissions in the contents of this message, which arise as a result of e-mail transmission.



More information about the cisco-nsp mailing list