[c-nsp] VRRP/HSRP question

[Rodney Dunn]

Not sure if 3750 supports it yet but you could
run EEM with a TCL script to watch the syslog
and configure it to add/remove the network statement
under the routing protocol when the syslog for HSRP
becomes active on that router.

The problem with that is your convergence will not
be as fast if you have a router failure.

Rodney


On Mon, Aug 22, 2005 at 12:19:39PM +0300, Andris Zarins wrote:
> Hi,
> 
>  
> 
> Example network consists of several c3750 switches and two of them are
> running VRRP/HSRP on some VLAN SVI. All of those switches run RIP to
> distribute reachability information of connected subnets. 
> 
>  
> 
> Is there a way to configure switch to advertize some subnet (the one
> with VRRP) to other network devices ONLY in case if that switch holds
> virtual address for that specific VRRP group (primary switch for that
> group)? If I configure 'redistribute connected' or 'network' statements
> for routing protocol - both switches will advertize that network, what
> doesnt work for me :-(
> 
>  
> 
> Andris 
> 
>  
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/