[c-nsp] Single Fiber Strand GBIC

[John Exum]

I've not used these converters but the other Transition converts are a 
little expensive but good.

http://www.transition.com/TransitionNetworks/Resources/en/PDF/TN_AppNote_sfiber.pdf

John Exum
Network Manager
Harding University


----- Original Message ----- 
From: "Spencer Wood" <Spencer.Wood at dot.state.oh.us>
To: <cisco-nsp at puck.nether.net>
Sent: Tuesday, August 23, 2005 8:55 AM
Subject: [c-nsp] Single Fiber Strand GBIC


> Slightly Off Topic here...
>
> We are needing to connect a couple of buildings together, but we only have
> a single strand of SM Fiber available.  I know that Cisco had a SFP based
> product (1000BASE-BX-D) that works great, but I was wondering if anyone
> knows of a GBIC Based product that will perform the same function?  The
> equipment we are connecting will not take a SFP (Cisco 4500 and 3550
> Switch), so GBIC's are our only option.
>
> Any idea's?
> Spencer
>
> ************************************************************
> Spencer Wood, Network Manager
> Ohio Department Of Transportation
> 1320 Arthur E. Adams Drive
> Columbus, Ohio 43221
> E-Mail: Spencer.Wood at dot.state.oh.us
> Phone: 614.644.5422/Fax: 614.887.4021/Cell: 614.774.3123
> *************************************************************
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>