[c-nsp] Cisc07206 VXR fast ethernet ports
Ganbold
ganbold at micom.mng.net
Tue Aug 23 23:33:55 EDT 2005
At 11:21 AM 8/24/2005, you wrote:
>You have done something on one card that isn't supported.
>
> PA Bay 0 Information:
> Gigabit-Ethernet PA, 1 ports
> EEPROM format version 1
> HW rev 1.00, Board revision A0
> Serial number: 25246822 Part number: 73-3144-04
>
> PA Bay 1 Information:
> Dual Port Fast Ethernet (RJ45), 2 ports
> EEPROM format version 4
> HW rev 1.00, Board revision B0
> Serial number: MPC05210075 Part number: 73-5419-06
>
>
>there isn't a GIGE PA for a 75xx. The only GIG option for a 75xx
>is the full height GEIP boards (one Vip2-50 based the other VIP4-80 based).
We have both, full height GEIP and GIGE PA on 7513 and it is working.
>I think you may have it recreated in slot 2 though.
Yes.
>This is the footprint we are looking for in this problem:
>
> > 01:36:04: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet2/1/0, c
>ha
> > nged state to up
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 PMA error register0 =
> 0000000000000000
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 PCI0 master address = 00000000
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 PCI0 slave address = 00000000
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 PMA error register1 =
> 0082281C01800000
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 PCI Master Parity error
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 PCI Slave Parity error
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 PCI1 master address = 0082281C
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 PCI1 slave address = 000E000C
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 Latched Addresses
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 MPU addr exception/WPE
> address = 00
>00
> > 0000
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 MPU addr exception/WPE data
> = 00000
>00
> > 0
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 ProcMem addr exception =
> 00000000
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 Pakmem addr exception = 00000000
> > 01:38:12: %VIP4-80 RM7000-1-MSG: slot2 System reloaded by a fatal
> hardware err
>or
> > 01:38:12: %VIP4-80 RM7000-1-MSG: slot2 caller=0x600E793C
> > 01:38:12: %VIP4-80 RM7000-1-MSG: slot2 System exception: sig=22,
> code=0x0, con
>te
> > xt=0x6076FFC8
>
>
>Can you please remove slot1 and recreate the problem with just slot2
>in the chassis?
You mean to remove GIGE PA? Unfortunately I can't.
Because we have already sent back those PA-2FE-TX cards
to the reseller and asking them to change those.
>Can you open a TAC case and ask them to attach it to CSCsa50332?
Should I do it now? Or should we wait those cards ?
>What type of traffic were you sending and at what loads?
Traffic is very low, it is less than 10mb.
>I'm going to try it in the lab again.
Please let me know if you find something.
Rodney I have one more question. Is it possible to change hardware and
board revisions?
Maybe I'm asking impossible question. Please let me know.
thanks,
Ganbold
>Rodney
>
>
>
>
>
>
> On Wed, Aug 24, 2005 at 10:09:21AM +0900, Ganbold wrote:
> > I have same problem.
> > We tested the 2 PA-2FE-TX cards on Cisco 7513 with VIP4-50 and VIP4-80.
> > When we first installed it was OK.
> > But when we connected cables and run real traffic router crashed and
> reloaded.
> > We tried both cards on several different slots, but it was the same,
> router
> > crashed and reloaded.
> > That was really strange.
> >
> > I attached the log file in this regard.
> >
> > Following is the show diag output:
> >
> > core-ub2#sh diag
> > Slot 1:
> > Physical slot 1, ~physical slot 0xE, logical slot 1, CBus 0
> > Microcode Status 0x4
> > Master Enable, LED, WCS Loaded
> > Board is analyzed
> > Pending I/O Status: None
> > EEPROM format version 1
> > VIP4-50 RM5271 controller, HW rev 2.02, board revision A0
> > Serial number: 20752386 Part number: 73-4708-04
> > Test history: 0x00 RMA number: 00-00-00
> > Flags: cisco 7000 board; 7500 compatible
> >
> > EEPROM contents (hex):
> > 0x20: 01 31 02 02 01 3C A8 02 49 12 64 04 00 00 00 00
> > 0x30: 50 17 EF 00 00 00 00 00 00 00 00 00 00 00 00 00
> >
> > Slot database information:
> > Flags: 0x4 Insertion time: 0x44E0 (1d15h ago)
> >
> > Controller Memory Size: 256 MBytes DRAM, 65536 KBytes SRAM
> >
> > PA Bay 0 Information:
> > Gigabit-Ethernet PA, 1 ports
> > EEPROM format version 1
> > HW rev 1.00, Board revision A0
> > Serial number: 25246822 Part number: 73-3144-04
> >
> > PA Bay 1 Information:
> > Dual Port Fast Ethernet (RJ45), 2 ports
> > EEPROM format version 4
> > >>>>> HW rev 1.00, Board revision B0
> > Serial number: MPC05210075 Part number: 73-5419-06
> >
> > 1 crash since restart.
> > Last crash context (Aug 03 2005 20:52:19):
> > $0 : 00000000, AT : 00000000, v0 : 00000002, v1 : 00000FF0
> > a0 : 60993840, a1 : 30390000, a2 : 00000001, a3 : 40080008
> > t0 : 00000180, t1 : 4E90424C, t2 : 00000001, t3 : 3400FF02
> > t4 : 600E7978, t5 : 000000F8, t6 : 00000000, t7 : 00000000
> > s0 : 6094A5A0, s1 : AC820100, s2 : 60993840, s3 : 60991C60
> > s4 : 00000065, s5 : 00000001, s6 : 80000000, s7 : 60720000
> > t8 : 60730000, t9 : 00000000, k0 : 00000000, k1 : 0000066B
> > gp : 60691140, sp : 6076B498, s8 : 00000000, ra : 6022C4DC
> > EPC : 00000002, ErrorEPC : 80008680, SREG : 3400E103
> > Cause 00000410 (Code 0x4): Address Error (load or instruction
> > fetch) exc
> > eption
> > Traceback= 0x2 0x6022C4DC 0x60260D0C 0x600E7820
> >
> >
> > Ganbold
> >
> > At 09:10 AM 8/24/2005, you wrote:
> > >We have tried to recreate this and can't.
> > >
> > >Can you post the crashinfo file so I can look at it?
> > >
> > >What type of crash was it?
> > >
> > >If someone can recreate it and help us I'll be more
> > >than glad to debug it and get DE involved to find
> > >root cause.
> > >
> > >The bug we are using to track it is:
> > >
> > >CSCsa50332
> > >Externally found moderate defect: Waiting (W)
> > >VIP4-80 with PA-2FE-TX may crash with parity error
> > >
> > >Rodney
> > >
> > >
> > >
> > >On Tue, Aug 23, 2005 at 11:27:34PM +0200, Gert Doering wrote:
> > > > Hi,
> > > >
> > > > On Tue, Aug 23, 2005 at 04:12:58PM -0500, Jerry Kersey wrote:
> > > > > bandwidth points are 600 and 400. Cisco says they have never saw
> this
> > > > > problem before. I find it hard to belive that no one else is trying
> > > to run 3
> > > > > or 4 fast ethernet ports on one ov these routers... What happens
> is the
> > > > > fa2/1 port starts going up/down several times, the router crashes,
> > > creates a
> > > > > crashinfo file and reloads...
> > > >
> > > > Welcome to the club. There seems to be a certain revision of PA-2FE-TX
> > > > cards that give lots of problems, as soon as their port 1 is
> used. "Been
> > > > there, done that" (on a VIP2-50 and on a 7206/NPE-400).
> > > >
> > > > Can you put the card into a lab router and run "show diag" against it?
> > > >
> > > > I'd bet it's hardware revision 1.0, board revision B0.
> > > >
> > > > gert
> > > >
> > > >
> > > > --
> > > > USENET is *not* the non-clickable part of WWW!
> > > >
> > > //www.muc.de/~gert/
> > > > Gert Doering - Munich,
> > > Germany gert at greenie.muc.de
> > > > fax:
> > > +49-89-35655025 gert at net.informatik.tu-muenchen.de
> > > > _______________________________________________
> > > > cisco-nsp mailing list cisco-nsp at puck.nether.net
> > > > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > > > archive at http://puck.nether.net/pipermail/cisco-nsp/
> > >_______________________________________________
> > >cisco-nsp mailing list cisco-nsp at puck.nether.net
> > >https://puck.nether.net/mailman/listinfo/cisco-nsp
> > >archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> > core-ub2#sh logg
> > core-ub2#sh logging
> > Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
> > Console logging: level debugging, 203 messages logged
> > Monitor logging: level debugging, 0 messages logged
> > Buffer logging: level debugging, 203 messages logged
> > Trap logging: level informational, 211 message lines logged
> >
> > Log Buffer (65536 bytes):
> >
> > 00:00:06: %RSP-3-DEVERR: Read cis from dev 1 error -6
> > 00:00:11: %RSP-3-SLAVECHANGE: Slave changed state from Slave to
> Non-participant
> > 00:00:14: %RSP-3-SLAVECHANGE: Slave changed state from Non-participant
> to Slave
> > 00:01:27: %RSP-3-SLAVECHANGE: Slave changed state from Slave to
> Non-participant
> > 00:01:29: %RSP-3-SLAVECHANGE: Slave changed state from Non-participant
> to Slave
> > 00:02:07: %SYS-5-CONFIG_I: Configured from memory by console
> >
> > 01:17:54: %SYS-5-CONFIG_I: Configured from console by vty0 (202.179.10.1)
> > 01:17:55: %LINK-3-UPDOWN: Interface FastEthernet1/1/1, changed state to
> down
> > 01:17:56: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet1/1/1, cha
> > nged state to down
> > 01:18:14: %VIP4-50 RM5271-1-MSG: slot1 IOBUS Error Interrupt Status
> register 0x4
> > 01:18:14: %VIP4-50 RM5271-1-MSG: slot1 Address/Command Strobe Timeout
> > 01:18:14: %VIP4-50 RM5271-1-MSG: slot1 IOBUS Error Address High 0x1C01
> > 01:18:14: %VIP4-50 RM5271-1-MSG: slot1 IOBUS Error Address Low 0xC
> > 01:18:15: %LINK-3-UPDOWN: Interface FastEthernet1/1/1, changed state to up
> > 01:18:16: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet1/1/1, cha
> > nged state to up
> > 01:18:30: %VIP4-50 RM5271-1-MSG: slot1 System reloaded by a Bus Error
> exception
> > 01:18:30: %VIP4-50 RM5271-1-MSG: slot1 caller=0x600E793C
> > 01:18:30: %VIP4-50 RM5271-1-MSG: slot1 System exception: sig=10,
> code=0x10, cont
> > ext=0x606F92C0
> > 01:18:30: %VIP4-50 RM5271-1-MSG: slot1 $0 : 00000000, AT : 00000000, v0
> : 000000
> > 02, v1 : 00000FF0,
> > 01:18:30: %VIP4-50 RM5271-1-MSG: slot1 a0 : 60993840, a1 : 30390000, a2
> : 000000
> > 01, a3 : 40080008,
> > 01:18:30: %VIP4-50 RM5271-1-MSG: slot1 t0 : 00000180, t1 : 4E90424C, t2
> : 000000
> > 01, t3 : 3400FF02,
> > 01:18:30: %VIP4-50 RM5271-1-MSG: slot1 t4 : 600E7978, t5 : 000000F8, t6
> : 000000
> > 00, t7 : 00000000,
> > 01:18:30: %VIP4-50 RM5271-1-MSG: slot1 s0 : 6094A5A0, s1 : AC820100, s2
> : 609938
> > 40, s3 : 60991C60,
> > 01:18:30: %VIP4-50 RM5271-1-MSG: slot1 s4 : 00000065, s5 : 00000001, s6
> : 800000
> > 00, s7 : 60720000,
> > 01:18:30: %VIP4-50 RM5271-1-MSG: slot1 t8 : 60730000, t9 : 00000000, k0
> : 000000
> > 00, k1 : 0000066B,
> > 01:18:30: %VIP4-50 RM5271-1-MSG: slot1 gp : 60691140, sp : 6076B498, s8
> : 000000
> > 00, ra : 6022C4DC,
> > 01:18:30: %VIP4-50 RM5271-1-MSG: slot1 EPC : 00000002, ErrorEPC :
> 80008680, SREG
> > : 3400E103
> > 01:18:30: %VIP4-50 RM5271-1-MSG: slot1 Cause 00000410 (Code 0x4)
> > 01:18:30: %VIP4-50 RM5271-1-MSG: slot1 Traceback= 2 6022C4DC
> 60260D0C 600
> > E7820
> > 01:18:30: %RSP-3-FOREVER: cmd 2 to VIP4-50 RM5271 (slot 1) took 99
> usecs, done 1
> > -Traceback= 603FF3C0 603FF9C4 603F779C 603F5694 60338CE8 60338F18
> 6035C824 6035C
> > 810
> > 01:18:30: %RSP-3-FOREVER: cmd 38 to VIP4-50 RM5271 (slot 1) took 111
> usecs, done
> > 1
> > -Traceback= 603FF3C0 603FF9C4 603F77D8 60403F64 603F56C4 60338CE8
> 60338F18 6035C
> > 824 6035C810
> > 01:18:30: %RSP-3-FOREVER: cmd 2 to VIP4-50 RM5271 (slot 1) took 271
> usecs, done
> > 1
> > -Traceback= 603FF3C0 603FF9C4 603F779C 603F5694 60338CE8 60338F18
> 6035C824 6035C
> > 810
> > 01:18:30: %RSP-3-FOREVER: cmd 38 to VIP4-50 RM5271 (slot 1) took 149
> usecs, done
> > 1
> > -Traceback= 603FF3C0 603FF9C4 603F77D8 60403F64 603F56C4 60338CE8
> 60338F18 6035C
> > 824 6035C810
> > 01:18:31: %DBUS-3-DBUSINTERRSWSET: Slot 1, Internal Error due to VIP crash
> > 01:18:45: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.5.1 on
> GigabitEthernet1/0/0 f
> > rom FULL to DOWN, Neighbor Down: Dead timer expired
> > 01:19:05: %RSP-3-RESTART: cbus complex
> > 01:20:56: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.5.8 on Serial4/1
> from FULL to
> > DOWN, Neighbor Down: Dead timer expired
> > 01:20:56: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.10.1 on
> FastEthernet3/0/0 fro
> > m FULL to DOWN, Neighbor Down: Dead timer expired
> > 01:20:56: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.5.17 on Serial2/0/5
> from FULL
> > to DOWN, Neighbor Down: Dead timer expired
> > 01:20:56: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.5.5 on Serial4/0
> from FULL to
> > DOWN, Neighbor Down: Dead timer expired
> > 01:20:56: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.5.13 on
> FastEthernet3/1/0 fro
> > m FULL to DOWN, Neighbor Down: Dead timer expired
> > 01:20:56: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.5.35 on Serial4/5
> from FULL t
> > o DOWN, Neighbor Down: Dead timer expired
> > 01:20:58: %LINK-3-UPDOWN: Interface FastEthernet1/1/1, changed state to
> down
> > 01:20:58: %LINK-3-UPDOWN: Interface FastEthernet11/0/0, changed state
> to down
> > 01:20:59: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet1/1/1, cha
> > nged state to down
> > 01:21:06: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.10.1 on
> FastEthernet3/0/0 fro
> > m LOADING to FULL, Loading Done
> > 01:21:06: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.5.5 on Serial4/0
> from LOADING
> > to FULL, Loading Done
> > 01:21:06: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.5.8 on Serial4/1
> from LOADING
> > to FULL, Loading Done
> > 01:21:16: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.5.17 on Serial2/0/5
> from LOAD
> > ING to FULL, Loading Done
> > 01:21:16: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.5.35 on Serial4/5
> from LOADIN
> > G to FULL, Loading Done
> > 01:21:35: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.5.1 on
> GigabitEthernet1/0/0 f
> > rom LOADING to FULL, Loading Done
> > 01:21:36: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.5.13 on
> FastEthernet3/1/0 fro
> > m LOADING to FULL, Loading Done
> > 01:23:54: %LINK-5-CHANGED: Interface FastEthernet1/1/1, changed state
> to adminis
> > tratively down
> > 01:24:29: %LINK-3-UPDOWN: Interface FastEthernet2/1/1, changed state to
> down
> > 01:24:43: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet2/1/1, cha
> > nged state to up
> > 01:24:49: %SYS-5-CONFIG_I: Configured from console by console
> > 01:24:49: %LINK-3-UPDOWN: Interface FastEthernet2/1/1, changed state to
> down
> > 01:24:50: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet2/1/1, cha
> > nged state to down
> > 01:25:39: %LINK-3-UPDOWN: Interface FastEthernet2/1/1, changed state to up
> > 01:25:40: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet2/1/1, cha
> > nged state to up
> > 01:30:08: %LINK-3-UPDOWN: Interface FastEthernet2/1/1, changed state to
> down
> > 01:30:10: %LINK-3-UPDOWN: Interface FastEthernet2/1/1, changed state to up
> > 01:34:49: %SYS-5-CONFIG_I: Configured from console by console
> > 01:34:49: %LINK-3-UPDOWN: Interface FastEthernet2/1/0, changed state to
> down
> > 01:36:03: %LINK-3-UPDOWN: Interface FastEthernet2/1/0, changed state to up
> > 01:36:04: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet2/1/0, cha
> > nged state to up
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 PMA error register0 =
> 0000000000000000
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 PCI0 master address = 00000000
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 PCI0 slave address = 00000000
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 PMA error register1 =
> 0082281C01800000
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 PCI Master Parity error
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 PCI Slave Parity error
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 PCI1 master address = 0082281C
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 PCI1 slave address = 000E000C
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 Latched Addresses
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 MPU addr exception/WPE
> address = 0000
> > 0000
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 MPU addr exception/WPE data
> = 0000000
> > 0
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 ProcMem addr exception =
> 00000000
> > 01:37:57: %VIP4-80 RM7000-1-MSG: slot2 Pakmem addr exception = 00000000
> > 01:38:12: %VIP4-80 RM7000-1-MSG: slot2 System reloaded by a fatal
> hardware error
> > 01:38:12: %VIP4-80 RM7000-1-MSG: slot2 caller=0x600E793C
> > 01:38:12: %VIP4-80 RM7000-1-MSG: slot2 System exception: sig=22,
> code=0x0, conte
> > xt=0x6076FFC8
> > 01:38:12: %VIP4-80 RM7000-1-MSG: slot2 $0 : 00000000, AT : 00000000, v0
> : 607000
> > 00, v1 : FFC8BE6E,
> > 01:38:12: %VIP4-80 RM7000-1-MSG: slot2 a0 : 0000007A, a1 : 00000000, a2
> : 000000
> > 01, a3 : 609164C0,
> > 01:38:12: %VIP4-80 RM7000-1-MSG: slot2 t0 : 080045FF, t1 : 4E90424C, t2
> : 080045
> > 00, t3 : FFFFFFCB,
> > 01:38:12: %VIP4-80 RM7000-1-MSG: slot2 t4 : 600E7978, t5 : 00000000, t6
> : 000001
> > 00, t7 : 00000001,
> > 01:38:12: %VIP4-80 RM7000-1-MSG: slot2 s0 : 00000000, s1 : 00001E00, s2
> : 609C49
> > C0, s3 : 00000002,
> > 01:38:12: %VIP4-80 RM7000-1-MSG: slot2 s4 : 00000001, s5 : 00000000, s6
> : 607000
> > 00, s7 : 00000000,
> > 01:38:12: %VIP4-80 RM7000-1-MSG: slot2 t8 : 60730000, t9 : 00000000, k0
> : 000000
> > 00, k1 : 00000644,
> > 01:38:12: %VIP4-80 RM7000-1-MSG: slot2 gp : 60691140, sp : 6076B500, s8
> : 000000
> > 00, ra : 600E7820,
> > 01:38:12: %VIP4-80 RM7000-1-MSG: slot2 EPC : 60260CF8, ErrorEPC :
> 80008680, SREG
> > : 3400E103
> > 01:38:12: %VIP4-80 RM7000-1-MSG: slot2 Cause 00001800 (Code 0x0)
> > 01:38:12: %VIP4-80 RM7000-1-MSG: slot2 Traceback= 60260CF8 600E7820
> > 01:38:13: %DBUS-3-DBUSINTERRSWSET: Slot 2, Internal Error due to VIP crash
> > 01:38:27: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.5.17 on Serial2/0/5
> from FULL
> > to DOWN, Neighbor Down: Dead timer expired
> > 01:38:42: %RSP-3-RESTART: cbus complex
> > 01:40:32: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.5.13 on
> FastEthernet3/1/0 fro
> > m FULL to DOWN, Neighbor Down: Dead timer expired
> > 01:40:32: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.5.35 on Serial4/5
> from FULL t
> > o DOWN, Neighbor Down: Dead timer expired
> > 01:40:32: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.5.8 on Serial4/1
> from FULL to
> > DOWN, Neighbor Down: Dead timer expired
> > 01:40:32: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.10.1 on
> FastEthernet3/0/0 fro
> > m FULL to DOWN, Neighbor Down: Dead timer expired
> > 01:40:32: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.5.1 on
> GigabitEthernet1/0/0 f
> > rom FULL to DOWN, Neighbor Down: Dead timer expired
> > 01:40:32: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.5.5 on Serial4/0
> from FULL to
> > DOWN, Neighbor Down: Dead timer expired
> > 01:40:34: %LINK-3-UPDOWN: Interface FastEthernet2/1/0, changed state to
> down
> > 01:40:34: %LINK-3-UPDOWN: Interface FastEthernet11/0/0, changed state
> to down
> > 01:40:35: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet2/1/0, cha
> > nged state to down
> > 01:40:42: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.10.1 on
> FastEthernet3/0/0 fro
> > m LOADING to FULL, Loading Done
> > 01:40:42: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.5.5 on Serial4/0
> from LOADING
> > to FULL, Loading Done
> > 01:40:42: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.5.8 on Serial4/1
> from LOADING
> > to FULL, Loading Done
> > 01:40:42: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.5.35 on Serial4/5
> from LOADIN
> > G to FULL, Loading Done
> > 01:40:44: %LINK-3-UPDOWN: Interface FastEthernet2/1/1, changed state to
> down
> > 01:40:45: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet2/1/1, cha
> > nged state to down
> > 01:40:52: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.5.17 on Serial2/0/5
> from LOAD
> > ING to FULL, Loading Done
> > 01:41:11: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.5.1 on
> GigabitEthernet1/0/0 f
> > rom LOADING to FULL, Loading Done
> > 01:41:12: %OSPF-5-ADJCHG: Process 117, Nbr 202.179.5.13 on
> FastEthernet3/1/0 fro
> > m LOADING to FULL, Loading Done
> >
> > core-ub2#$
> > core-ub2#
> >
> 33333333333333333333333333333333333333333333333333333333333333333333333333333333
> > core-ub2#sh diag
> > Slot 1:
> > Physical slot 1, ~physical slot 0xE, logical slot 1, CBus 0
> > Microcode Status 0x4
> > Master Enable, LED, WCS Loaded
> > Board is analyzed
> > Pending I/O Status: None
> > EEPROM format version 1
> > VIP4-50 RM5271 controller, HW rev 2.02, board revision A0
> > Serial number: 20752386 Part number: 73-4708-04
> > Test history: 0x00 RMA number: 00-00-00
> > Flags: cisco 7000 board; 7500 compatible
> >
> > EEPROM contents (hex):
> > 0x20: 01 31 02 02 01 3C A8 02 49 12 64 04 00 00 00 00
> > 0x30: 50 17 EF 00 00 00 00 00 00 00 00 00 00 00 00 00
> >
> > Slot database information:
> > Flags: 0x4 Insertion time: 0x44E0 (01:44:38 ago)
> >
> > Controller Memory Size: 256 MBytes DRAM, 65536 KBytes SRAM
> >
> > PA Bay 0 Information:
> > Gigabit-Ethernet PA, 1 ports
> > EEPROM format version 1
> > HW rev 1.00, Board revision A0
> > Serial number: 25246822 Part number: 73-3144-04
> >
> > PA Bay 1 Information:
> > Dual Port Fast Ethernet (RJ45), 2 ports
> > EEPROM format version 4
> > HW rev 1.00, Board revision B0
> > Serial number: MPC05210075 Part number: 73-5419-06
> >
> > 1 crash since restart.
> > Last crash context (Aug 03 2005 20:52:19):
> > $0 : 00000000, AT : 00000000, v0 : 00000002, v1 : 00000FF0
> > a0 : 60993840, a1 : 30390000, a2 : 00000001, a3 : 40080008
> > t0 : 00000180, t1 : 4E90424C, t2 : 00000001, t3 : 3400FF02
> > t4 : 600E7978, t5 : 000000F8, t6 : 00000000, t7 : 00000000
> > s0 : 6094A5A0, s1 : AC820100, s2 : 60993840, s3 : 60991C60
> > s4 : 00000065, s5 : 00000001, s6 : 80000000, s7 : 60720000
> > t8 : 60730000, t9 : 00000000, k0 : 00000000, k1 : 0000066B
> > gp : 60691140, sp : 6076B498, s8 : 00000000, ra : 6022C4DC
> > EPC : 00000002, ErrorEPC : 80008680, SREG : 3400E103
> > Cause 00000410 (Code 0x4): Address Error (load or instruction
> fetch) exc
> > eption
> > Traceback= 0x2 0x6022C4DC 0x60260D0C 0x600E7820
> >
> >
> >
> > --Boot log begin--
> >
> > Cisco Internetwork Operating System Software
> > IOS (tm) VIP Software (SVIP-DW-M), Version 12.1(5a)E1, EARLY DEPLOYMENT
> RELEASE
> > SOFTWARE (fc1)
> > Copyright (c) 1986-2000 by cisco Systems, Inc.
> > Compiled Tue 26-Dec-00 23:01 by eaarmas
> > Image text-base: 0x60010940, data-base: 0x60360000
> >
> >
> > --Boot log end--
> >
> > Slot 2:
> > Physical slot 2, ~physical slot 0xD, logical slot 2, CBus 0
> > Microcode Status 0x4
> > Master Enable, LED, WCS Loaded
> > Board is analyzed
> > Pending I/O Status: None
> > EEPROM format version 1
> > VIP4-80 RM7000 controller, HW rev 2.01, board revision A0
> > Serial number: 23274300 Part number: 73-3143-03
> > Test history: 0x00 RMA number: 00-00-00
> > Flags: cisco 7000 board; 7500 compatible
> >
> > EEPROM contents (hex):
> > 0x20: 01 22 02 01 01 63 23 3C 49 0C 47 03 00 00 00 00
> > 0x30: 50 05 35 00 00 00 00 00 00 00 00 00 00 00 00 00
> >
> > Slot database information:
> > Flags: 0x4 Insertion time: 0x44E0 (01:44:41 ago)
> >
> > Controller Memory Size: 256 MBytes DRAM, 65536 KBytes SRAM
> >
> > PA Bay 0 Information:
> > Mx Serial PA, 8 ports
> > EEPROM format version 1
> > HW rev 1.16, Board revision A0
> > Serial number: 22490416 Part number: 73-1580-09
> >
> > PA Bay 1 Information:
> > Dual Port Fast Ethernet (RJ45), 2 ports
> > EEPROM format version 4
> > HW rev 1.00, Board revision B0
> > Serial number: JAE05490880 Part number: 73-5419-06
> >
> > 1 crash since restart.
> > Last crash context (Aug 03 2005 21:12:01):
> > Nevada Error Interrupt Register = 0x2
> > PMA error interrupt
> > PMA Error Register = 0000000000000000
> > PCI master address = 0000000
> > $0 : 00000000, AT : 00000000, v0 : 60700000, v1 : FFC8BE6E
> > a0 : 0000007A, a1 : 00000000, a2 : 00000001, a3 : 609164C0
> > t0 : 080045FF, t1 : 4E90424C, t2 : 08004500, t3 : FFFFFFCB
> > t4 : 600E7978, t5 : 00000000, t6 : 00000100, t7 : 00000001
> > s0 : 00000000, s1 : 00001E00, s2 : 609C49C0, s3 : 00000002
> > s4 : 00000001, s5 : 00000000, s6 : 60700000, s7 : 00000000
> > t8 : 60730000, t9 : 00000000, k0 : 00000000, k1 : 00000644
> > gp : 60691140, sp : 6076B500, s8 : 00000000, ra : 600E7820
> > EPC : 60260CF8, ErrorEPC : 80008680, SREG : 3400E103
> > Cause 00001800 (Code 0x0): Interrupt exception
> > Traceback= 0x60260CF8 0x600E7820
> >
> >
> > --Boot log begin--
> >
> > Cisco Internetwork Operating System Software
> > IOS (tm) VIP Software (SVIP-DW-M), Version 12.1(5a)E1, EARLY DEPLOYMENT
> RELEASE
> > SOFTWARE (fc1)
> > Copyright (c) 1986-2000 by cisco Systems, Inc.
> > Compiled Tue 26-Dec-00 23:01 by eaarmas
> > Image text-base: 0x60010940, data-base: 0x60360000
> >
> >
> > --Boot log end--
> >
> > Slot 3:
> > Physical slot 3, ~physical slot 0xC, logical slot 3, CBus 0
> > Microcode Status 0x4
> > Master Enable, LED, WCS Loaded
> > Board is analyzed
> > Pending I/O Status: None
> > EEPROM format version 1
> > VIP2 R5K controller, HW rev 2.02, board revision A0
> > Serial number: 10020157 Part number: 73-2167-04
> > Test history: 0x00 RMA number: 00-00-00
> > Flags: cisco 7000 board; 7500 compatible
> >
> > EEPROM contents (hex):
> > 0x20: 01 1E 02 02 00 98 E5 3D 49 08 77 04 00 00 00 00
> > 0x30: 50 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
> >
> > Slot database information:
> > Flags: 0x4 Insertion time: 0x44E0 (01:44:47 ago)
> >
> > Controller Memory Size: 128 MBytes DRAM, 8192 KBytes SRAM
> >
> > PA Bay 0 Information:
> > Fast-Ethernet PA, 1 ports, 100BaseTX-ISL
> > EEPROM format version 1
> > HW rev 1.04, Board revision B0
> > Serial number: 22551810 Part number: 73-1688-05
> >
> > PA Bay 1 Information:
> > Fast-Ethernet PA, 1 ports, 100BaseTX-ISL
> > EEPROM format version 1
> > HW rev 1.04, Board revision B0
> > Serial number: 20671794 Part number: 73-1688-05
> >
> > --Boot log begin--
> >
> > Cisco Internetwork Operating System Software
> > IOS (tm) VIP Software (SVIP-DW-M), Version 12.1(5a)E1, EARLY DEPLOYMENT
> RELEASE
> > SOFTWARE (fc1)
> > Copyright (c) 1986-2000 by cisco Systems, Inc.
> > Compiled Tue 26-Dec-00 23:01 by eaarmas
> > Image text-base: 0x60010940, data-base: 0x60360000
> >
> >
> > --Boot log end--
> >
> > Slot 4:
> > Physical slot 4, ~physical slot 0xB, logical slot 4, CBus 0
> > Microcode Status 0x0
> > Master Enable, LED, WCS Loaded
> > Board is analyzed
> > EEPROM format version 1
> > FSIP controller, HW rev 1.12, board revision A0
> > Serial number: 05896699 Part number: 73-1126-06
> > Test history: 0x00 RMA number: 00-00-00
> > Flags: cisco 7000 board; 7500 compatible
> >
> > EEPROM contents (hex):
> > 0x20: 01 07 01 0C 00 59 F9 FB 49 04 66 06 00 00 00 00
> > 0x30: 50 00 00 00 FF 00 00 00 00 00 00 00 00 00 00 00
> >
> > Slot database information:
> > Flags: 0x4 Insertion time: 0x44E0 (01:44:50 ago)
> > Slot 6:
> > EEPROM format version 1
> > Route/Switch Processor 8, HW rev 1.03, board revision A0
> > Serial number: 13949594 Part number: 73-4221-03
> > Test history: 0x00 RMA number: 00-00-00
> > Flags: cisco 7000 board; 7500 compatible
> >
> > EEPROM contents (hex):
> > 0x20: 01 24 01 03 00 D4 DA 9A 49 10 7D 03 00 00 00 00
> > 0x30: 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > Slot 7:
> > EEPROM format version 1
> > Route/Switch Processor 8, HW rev 1.03, board revision A0
> > Serial number: 23979134 Part number: 73-4221-03
> > Test history: 0x00 RMA number: 00-00-00
> > Flags: cisco 7000 board; 7500 compatible
> >
> > EEPROM contents (hex):
> > 0x20: 01 24 01 03 01 6D E4 7E 49 10 7D 03 00 00 00 00
> > 0x30: 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > Slot 10:
> > Physical slot 10, ~physical slot 0x5, logical slot 10, CBus 0
> > Microcode Status 0x0
> > Master Enable, LED, WCS Loaded
> > Board is analyzed
> > EEPROM format version 1
> > FSIP controller, HW rev 1.12, board revision A0
> > Serial number: 05896785 Part number: 73-1126-06
> > Test history: 0x00 RMA number: 00-00-00
> > Flags: cisco 7000 board; 7500 compatible
> >
> > EEPROM contents (hex):
> > 0x20: 01 07 01 0C 00 59 FA 51 49 04 66 06 00 00 00 00
> > 0x30: 50 00 00 00 FF 00 00 00 00 00 00 00 00 00 00 00
> >
> > Slot database information:
> > Flags: 0x4 Insertion time: 0x44E0 (01:44:53 ago)
> > Slot 11:
> > Physical slot 11, ~physical slot 0x4, logical slot 11, CBus 0
> > Microcode Status 0x4
> > Master Enable, LED, WCS Loaded
> > Board is analyzed
> > Pending I/O Status: None
> > EEPROM format version 1
> > FEIP2 controller, HW rev 2.11, board revision E0
> > Serial number: 15357761 Part number: 73-1684-04
> > Test history: 0x0E RMA number: 00-00-00
> > Flags: cisco 7000 board; 7500 compatible
> >
> > EEPROM contents (hex):
> > 0x20: 01 20 02 0B 00 EA 57 41 49 06 94 04 0E 00 00 00
> > 0x30: 70 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
> >
> > Slot database information:
> > Flags: 0x4 Insertion time: 0x44E0 (01:44:56 ago)
> >
> > Controller Memory Size: 32 MBytes DRAM, 2048 KBytes SRAM
> >
> > PA Bay 0 Information:
> > Fast-Ethernet PA, 1 ports, 100BaseTX-ISL
> > EEPROM format version 1
> > HW rev 1.04, Board revision B0
> > Serial number: 15342689 Part number: 73-2570-02
> >
> > --Boot log begin--
> >
> > Cisco Internetwork Operating System Software
> > IOS (tm) VIP Software (SVIP-DW-M), Version 12.1(5a)E1, EARLY DEPLOYMENT
> RELEASE
> > SOFTWARE (fc1)
> > Copyright (c) 1986-2000 by cisco Systems, Inc.
> > Compiled Tue 26-Dec-00 23:01 by eaarmas
> > Image text-base: 0x60010940, data-base: 0x60360000
> >
> >
> > --Boot log end--
> >
> > Slot 31 (virtual):
> > EEPROM format version 1
> > Chassis Interface, HW rev 1.01, board revision C0
> > Serial number: 16191650 Part number: 73-1306-02
> > Test history: 0x00 RMA number: 00-00-00
> > Flags: cisco 7000 board
> >
> > EEPROM contents (hex):
> > 0x20: 01 10 01 01 00 F7 10 A2 49 05 1A 02 00 00 00 00
> > 0x30: 60 00 00 00 FF 00 00 00 00 00 00 00 00 00 00 00
More information about the cisco-nsp
mailing list