[c-nsp] 7500 RSP16 boot not reading flash disk

Joe Loiacono jloiacon at csc.com
Wed Aug 31 13:47:33 EDT 2005





Cannot boot a new RSP16 (in a 7513) from a 64M flash disk (Cisco 64M ATA
Flash PC Card). It appears that the RSP can't read the flash disk:

Errors look like:

"device does not contain a valid magic number
loadprog: error - on file open
boot: cannot load disk1:rsp-jk9o3sv-m3.124-1a.bin"

I formatted the disk from the RSP after booting from NVRAM BOOTLDR. I
successfully 'tftp'd' the image onto the flash disk. The 'sh disk1:' and
'dir disk1:' commands work fine. I've used a second flash disk with same
symptoms. Any ideas?

The start config includes:

boot system flash disk1:rsp-jk9o3sv-m3.124-1a.bin

... and the CONFIG REG is:

0x2102

Thanks,

Joe Loiacono



More information about the cisco-nsp mailing list