[c-nsp] IP Cef - Two T1s - getting full bandwidth download but not upload

[Bob Fronk]

I tried changing to load sharing per-packet, but got no different
result.  So you are saying that I will have to change to MLPPP with
Sprint, then add the load sharing per-packet?

Bob Fronk, MCSE
bfronk at davishelliot.com   
 
 
 

-----Original Message-----
From: Jon Lewis [mailto:jlewis at lewis.org] 
Sent: Tuesday, December 06, 2005 11:17 AM
To: Bob Fronk
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] IP Cef - Two T1s - getting full bandwidth download
but not upload

On Tue, 6 Dec 2005, Bob Fronk wrote:

> I have used IP Cef and Load sharing per destination.  When doing speed
> tests, I am getting nearly 3mbps download, but only 1.5 upload.  It is
> as if there is only one T1 in use for upload.
>
> What am I missing?

Per destination load sharing will give a max 1.5mbps to any single 
session.  If you want 3mbps, you need per-packet or MLPPP.  For MLPPP, 
you'll have to coordinate the change with Sprint, if they're willing to
do 
MLPPP.


----------------------------------------------------------------------
  Jon Lewis                   |  I route
  Senior Network Engineer     |  therefore you are
  Atlantic Net                |
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________