[c-nsp] IOS for 7200

[Rodney Dunn]

It's a 75xx MTU issue that causes a MEMD recarve on changing
encapsulation setting.

Rodney

On Tue, Dec 13, 2005 at 10:14:41AM +0000, Ian Dickinson wrote:
> Has anyone got any answers to this?
> We'd like to move to 12.3(17) due to the fix in disable-connected-check
> parsing CSCdz53880, but don't know what the changes in 17a are...
> 
> Ian
> 
> Olav Langeland wrote:
> > Hi,
> > 
> > thanks for your and Ed's reply, 12.3 it is then. I was hoping to take
> > the routers online next week, what is the most important changes between
> > 12.3(17) and 12.3(17a)? 
> > 
> > -olac
> > 
> > 
> >>-----Original Message-----
> >>From: Rodney Dunn [mailto:rodunn at cisco.com] 
> >>Sent: 07. desember 2005 19.50
> >>To: Olav Langeland
> >>Cc: cisco-nsp at puck.nether.net
> >>Subject: Re: [c-nsp] IOS for 7200
> >>
> >>If you don't need a 12.4 feature you should go with 12.3.
> >>
> >>Wait a few weeks for 12.3(17a). 
> >>
> >>Rodney
> >>
> >>On Wed, Dec 07, 2005 at 06:43:44PM +0100, Olav Langeland wrote:
> >>
> >>>Any suggestions for a good and stable IOS going into some 
> >>
> >>7206VXR with
> >>
> >>>NPE-G1? It will basically do BGP, netflow, MPLS and some ACL. I was
> >>>looking at both 12.3 and 12.4 instead of going with good 
> >>
> >>old 12.2, but
> >>
> >>>found it difficult to decide :)
> >>>
> >>>-olav
> -- 
> Ian Dickinson
> Development Engineer
> PIPEX
> ian.dickinson at pipex.net
> http://www.pipex.net
> 
> This e-mail is subject to: http://www.pipex.net/disclaimer.html