[c-nsp] Configuring Voice on 2651XM with FXS card

[Ted Mittelstaedt]

I don't think you can do 2 FXS cards back to back, one side has to be
a FXO the other a FXS.  What is plugged into each side?

Ted

>-----Original Message-----
>From: cisco-nsp-bounces at puck.nether.net 
>[mailto:cisco-nsp-bounces at puck.nether.net]On Behalf Of Prit Patel
>Sent: Monday, December 26, 2005 3:03 AM
>To: NSP List
>Subject: [c-nsp] Configuring Voice on 2651XM with FXS card
>
>
>Dear All
>
>I want to configure the VIC-2FXS card on my 2651XM router 
>located at Site A
>and site B.
>
>I want to establish analog voice communication between both the 
>site using
>FXS card installed at both the router.
>No PBX is involved in this.
>
>Pl guide me to do the config of the same.
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>-- 
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.1.371 / Virus Database: 267.14.7/214 - Release Date: 
>12/23/2005
>