[c-nsp] FWSM v2.3.3 NAT issue

[Brett Looney]

Scott,

At 23:48 28/12/2005, you wrote:
>What's the reason for not using static NAT?

Because I need multiple hosts on the outside interface to access some 
services on the inside interfaces but they need to appear to come 
from a single IP address.

>What are your security levels for each interface?

OUTSIDE: 0
INSIDE: 70

And to reiterate - this was working fine with the earlier code... 
There were no config changes made during the upgrade.

B.