[c-nsp] Cisco 2621 & Fast Ethernet Network Modules

[Tim Jackson]

Neither is the NM-1FE2W.

-Tim


-----Original Message-----
From:	cisco-nsp-bounces at puck.nether.net on behalf of Rey Martin
Sent:	Wed 2/2/2005 8:43 AM
To:	Claydon, Tom; cisco-nsp at puck.nether.net
Cc:	
Subject:	Re: [c-nsp] Cisco 2621 & Fast Ethernet Network Modules
afaik, nope.

NM-2FE2W not supported for 261x/2x


----- Original Message ----- 
From: "Claydon, Tom" <Tom.Claydon at dobsontelco.net>
To: <cisco-nsp at puck.nether.net>
Sent: Wednesday, February 02, 2005 10:27 PM
Subject: [c-nsp] Cisco 2621 & Fast Ethernet Network Modules


> Hello,
> 
> We have a customer with one 2610 and one 2621, and both routers need
> additional 10/100 Fast Ethernet interfaces. We had thought about adding
> either a NM-1E or NM-4E module, but my understanding is that these
> modules are 10BaseT only.
> 
> Will a NM-2FE2W module work in either one of these routers?
> 
> Thanks,
> 
> = TC
> 
> --
> Tom Claydon, IT/ATM Network Engineer
> Dobson Telephone Company
> phone: (405) 391-8201  cell: (405) 834-0341
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/