[c-nsp] NPE-G1 + PA-2FE-TX

[Thomas Kernen]

Hi Simon,

>
> Just found bug CSCsa51518 thanks to the output interpreter, but I'm 
> finding
> it hard to believe that the NPE-G1 just doesn't work with a PA-2FE-TX.
>
> Is there anyone running this combination? Any hints on making it work?

I have quite a few NPE-G1's running with PA-2FE-TX's and no problems, 
currently running 12.2(25)Sx

Cisco 7206VXR (NPE-G1) processor (revision A) with 229376K/32768K bytes 
of memory.
Processor board ID 29554099
SB-1 CPU at 700Mhz, Implementation 1025, Rev 0.2, 512KB L2 Cache
6 slot VXR midplane, Version 2.7

Last reset from power-on

<snip>

2 FastEthernet interfaces <- This is a PA-2FE-TX
3 Gigabit Ethernet interfaces
1 SRP interface

Thomas