[c-nsp] 7940 VLAN's

[Rey Martin]

I think the dhcp option you mentioned is option 150, 
to specify the tftp server IP address but not the vlan settings.



----- Original Message ----- 
From: "Brian Feeny" <signal at shreve.net>
To: "Tarko Tikan" <tarko at lanparty.ee>
Cc: <cisco-nsp at puck.nether.net>
Sent: Thursday, February 03, 2005 6:51 AM
Subject: Re: [c-nsp] 7940 VLAN's


> 
> I don't suppose cisco has a vendor specific dhcp option that would 
> allow one to set
> voice vlan?  I did search for this and didn't see anything.
> 
> Thanks for all that replied, I am going to do it the way described 
> below.
> 
> Brian
> 
> On Feb 2, 2005, at 1:16 PM, Tarko Tikan wrote:
> 
>> hi!
>>
>>> I am just wondering if there is a way to split vlan's like that on a
>>> 7940, if its just talking to an HP procurve.
>>
>> done that, configure your data vlan untagged and voice vlan tagged on 
>> procurve
>> port. then manually set admin vlan id on the phone to match voice vlan 
>> id.
>>
>> -- 
>> tarko
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
> ---------------------------------------------
> Brian Feeny, CCIE #8036, CISSP
> Network Engineer
> ShreveNet Inc.
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/