[c-nsp] PIX tunnel.

[ALI Rijas Mannanthara]

Hi All,

 

This is my first mail to this group. friends I Configured a tunnel from
PIX to a remote firewall .

 

I have 2 interesting traffic like 

 

Access-list 103 local      remote subnet 1

Access-list 103 local      remote subnet  2 through the tunnel.

 

When I say sh crypto isa sa it gives me this 

 

        dst               src        state     pending     created

  local WAN ip    remote peer     MM_SA_SETUP   0           0

  local WAN ip    remote peer     QM_IDLE         0           0

  local WAN ip    remote peer     QM_IDLE         0           2

  local WAN ip    remote peer     QM_IDLE         0           0

  remote peer     local WAN ip    QM_IDLE         0           4

 

tunnel is fine but want to know what is this created 2 and 4 while I
have only 1 tunnel parameters.

 

Thanks ,

 

Rijas

EPBX : 6226

VoIP : 248-994-4858

 

This E-Mail is intended only for the use of the individual or entity to
which it is addressed and may contain information that is privileged,
confidential, and exempt from disclosure. If the reader of this document
is not the intended recipient or an employee or agent responsible for
delivering this document to the intended recipient, you are hereby
notified that any dissemination, distribution, or copying of this
document is strictly prohibited. If you have received this document in
error, please delete it. Thank you. 

 

Confidentiality Statement:

This message is intended only for the individual or entity to which it is addressed. It may contain privileged, confidential information which is exempt from disclosure under applicable laws. If you are not the intended recipient, please note that you are strictly prohibited from disseminating or distributing this information (other than to the intended recipient) or copying this information. If you have received this communication in error, please notify us immediately by return email.