[c-nsp] Cisco 2621 & Fast Ethernet Network Modules
Ian Henderson
ianh at chime.net.au
Sat Feb 5 07:58:33 EST 2005
On Wed, 2 Feb 2005, Sorin CONSTANTINESCU wrote:
> I doublechecked using the "Hardware-Software Compatability Matrix", and
> the 261x/262x only supports NM-16ESW, NM-1E and NM-4E.
I've got two 2620's in my lab running NM-1FE's just fine.
R4>show diag
Slot 0:
C2620 1FE Mainboard Port adapter, 3 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 1.1
PCB Serial Number : JAB032506FN (562422222)
Part Number : 73-2843-04
RMA History : 00
RMA Number : 0-0-0-0
Board Revision : A0
Deviation Number : 0-0
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 00 94 41 01 01 C1 17 4A 41 42 30 33 32
0x10: 35 30 36 46 4E 20 28 35 36 32 34 32 32 32 32 32
0x20: 29 82 49 0B 1B 04 04 00 81 00 00 00 00 42 41 30
0x30: 80 00 00 00 00 FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
WIC Slot 0:
E1 Drop&Insert & G.703 (2 port) WAN daughter card WAN daughter
card
Hardware revision 1.0 Board revision B0
Serial number 30223199 Part number 800-06724-02
Test history 0x0 RMA number 00-00-00
Connector type PCI
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 30 01 00 01 CD 2B 5F 50 1A 44 02 00 00 00 00
0x30: 58 00 00 00 03 04 08 00 FF FF FF FF FF FF FF FF
WIC Slot 1:
BRI S/T - 2186 WAN daughter card
Hardware revision 1.3 Board revision A0
Serial number 16820839 Part number 800-01833-03
Test history 0x0 RMA number 00-00-00
Connector type Wan Module
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 07 01 03 01 00 AA 67 50 07 29 03 00 00 00 00
0x30: 50 00 00 00 99 10 28 01 FF FF FF FF FF FF FF FF
Slot 1:
Fast-ethernet Port adapter, 1 port
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware revision 1.0 Board revision D0
Serial number 13850031 Part number 800-03490-02
Test history 0x0 RMA number 00-00-00
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 44 01 00 00 D3 55 AF 50 0D A2 02 00 00 00 00
0x30: 68 00 00 00 99 04 21 00 FF FF FF FF FF FF FF FF
R4>show vers
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-JS-M), Version 12.2(12a), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Tue 24-Sep-02 01:15 by pwade
Image text-base: 0x8000808C, data-base: 0x8141ABD8
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
R4 uptime is 4 weeks, 6 days, 2 hours, 38 minutes
System returned to ROM by power-on
System image file is "flash:c2600-js-mz.122-12a.bin"
cisco 2620 (MPC860) processor (revision 0x101) with 41984K/7168K bytes of
memory.
Processor board ID JAB032506FN (562422222)
M860 processor: part number 0, mask 49
Channelized E1, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
Primary Rate ISDN software, Version 1.1.
Basic Rate ISDN software, Version 1.1.
2 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
1 ISDN Basic Rate interface(s)
2 Channelized E1/PRI port(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2002
R4>
--
Ian Henderson CCNA, CCNP
Senior Network Engineer, Chime Communications
More information about the cisco-nsp
mailing list