[c-nsp] 3550 and BGP

[Hank Nussbacher]

At 08:52 AM 07-02-05 -0500, Jon Lewis wrote:
>On Mon, 7 Feb 2005, Hank Nussbacher wrote:
>
> > The Catalyst 3550 Multilayer Switch Command Reference, Rel. 12.2(25)SE:
> > 
> http://www.cisco.com/application/pdf/en/us/guest/products/ps646/c2001/ccmigration_09186a00802cce0e.pdf
> > has no mention of any BGP command yet "Unsupported CLI Commands in 
> Cisco IOS
> > Release 12.2(25)SE":
> > 
> http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12225se/3550scg/swuncli.pdf
> >
> > lists:
> > >Unsupported BGP Router Configuration Commands
> > >address-family vpnv4
> > >default-information originate
> > >neighbor advertise-map
> > >neighbor allowas-in
> > >neighbor default-originate
> > >neighbor description
> > >network backdoor
> > >table-map
> >
> > Can someone point me at the Cisco documented set of BGP support for the 
> 3550?
>
>That's odd.  Running 12.1(19)EA1a (I didn't know they even had 12.2 code
>for the 3550), I'm able to have neighbor descriptions.

12.1(20)EA2 also lists the same commands as unsupported:
http://www.cisco.com/en/US/products/hw/switches/ps646/products_configuration_guide_chapter09186a0080211d4f.html

-Hank


>----------------------------------------------------------------------
>  Jon Lewis                   |  I route
>  Senior Network Engineer     |  therefore you are
>  Atlantic Net                |
>_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
>
>  +++++++++++++++++++++++++++++++++++++++++++
>  This Mail Was Scanned By Mail-seCure System
>  at the Tel-Aviv University CC.