[c-nsp] catalyst 2950 support .1q tunneling?

[Richard Doty (US)]

802.1q tunneling is not supported on 2950s.

Refer to -

http://www.cisco.com/en/US/products/hw/switches/ps628/prod_bulletin09186
a00800b3089.html

Rich


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Aaron Glenn
Sent: Saturday, February 19, 2005 2:07 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] catalyst 2950 support .1q tunneling?

Per this graphic on cisco.com:
http://www.cisco.com/warp/public/cc/so/neso/meso/ns227/mtrwn_wp/mtrwn_w6
.gif

I can't find anything about such functionality in any of its
documentation. Is .1q tunneling only supported on the 3550 and up?

Thanks,
aaron.glenn
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/