[c-nsp] MPLS support on 2600xm

[Yasser Aly]

Cisco 2611 does support MPLS and can be used as a PE router. I have one running 12.2(15)T12


Maher Adib <maher at pd.jaring.my> wrote:
Not sure that 2600 series support for PE routers especially running on
MPLS, but for multivrf..I think it does support...

regards,

maher

Yinglam Cheung said the following on 2/20/2005 4:01 PM:
> Can someone confirm something here for me? I loaded 12.3(11)T with advaced enterprise feature set on a 2600XM with 256Mb DRAM and found no mpls support. By browsing Feature Navigator, I found out 2691 is the only platform in 2600 series. I remember the basic MPLS functionality like L3VPN was even supported on 2600 (non XM), now I guess Cisco has changed its marketing strategy on MPLS platform support? Thanks.
> 
> 
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Search presents - Jib Jab's 'Second Term'
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 

_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/