[c-nsp] Latency on ATM IMA circuits

[John Neiberger]

>>> Peyton Koran <pkoran at uplogix.com> 2/21/05 3:54:51 PM >>>
>Do you mind sharing the config that you have for the Cisco 8 port?

Sure, no problem. It's pretty simple, but I've never configured an IMA
interface before so I don't know that it's correct. The link is working
but I don't know if there's something I could do to make it work
better.

interface ATM4/IMA0
 no ip address
 no atm ilmi-keepalive
 ima active-links-minimum 2
 ima clock-mode independent
end
interface ATM4/IMA0.100 point-to-point
 ip address a.b.c.d 255.255.255.252
 ip accounting output-packets
 pvc 1/100 
 !

Thanks,
John
--