[c-nsp] Cisco 1700 as a vpn server

[Reuben Farrelly]

What client software are you using for the VPN btw?

reuben



At 11:56 p.m. 23/02/2005, Timothy Arnold wrote:
>Hi,
>
>The specific problem is that the client's ethernet connection has 
>10.0.51.x address and is obtaining another 10.x address with a different 
>subnet mask - I thought this might be the cause of why I cannot ping 
>anything on the 10.x address?
>
>Thanks
>Tim.
>
>On Wed, 2005-02-23 at 23:52 +1300, Reuben Farrelly wrote:
>>
>>
>>I am not certain but I *think* this might be just the way Windows clients
>>appear to handle VPDN type access.  I bet if you use a 192.168.0.0 address
>>you'll see a class C sized mask appear in the Windows routing table
>>instead, regardless of what mask you specify for your pool.
>>
>>Having said that, it's not really a problem as the router will proxy-arp on
>>behalf of the client when contacting LAN IP addresses, and Windows will
>>forward anything not for itself even if on the same subnet, back to the
>>router going the other way.  It is a Point-To-Point type link, afterall.
>>
>>Are you seeing any specific problem?
>>
>>reuben
>>
>>
>>
>>At 11:39 p.m. 23/02/2005, you wrote:
>> >Hi,
>> >
>> >I have set-up a Cisco 1700 as a vpn server. Th fa interface has the
>> >address 10.1.1.13/24
>> >
>> >I set-up a pool of 10 addresses from the 10.1.1.0/24 address space. The
>> >client connects fine and gets an address, but the subnet mask is
>> >255.0.0.0
>> >
>> >Any ideas?
>> >Thanks
>> >Tim.
>> >
>> >_______________________________________________
>> >cisco-nsp mailing 
>> list  <mailto:cisco-nsp at puck.nether.net>cisco-nsp at puck.nether.net
>> >https://puck.nether.net/mailman/listinfo/cisco-nsp
>> >archive at 
>> <http://puck.nether.net/pipermail/cisco-nsp/>http://puck.nether.net/pipermail/cisco-nsp/
>>