[c-nsp] resetting dcsp on switch port

[McCallum, Robert]

just make the port a no trust state.

Robert McCallum 


> -----Original Message-----
> From: Mark Pace Balzan [mailto:mpb at melitacable.com] 
> Sent: 23 February 2005 13:52
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] resetting dcsp on switch port
> 
> 
> Hi All,
> 
> Which switches support resetting DSCP value to zero, for all 
> IP traffic 
> input or output on a given port
> 
> I tried on a lab 2900 box, but it doesnt seem to be 
> supported, possibly 
> since it only does L2 stuff without L3 intelligence
> 
> 
> Thanks
> 
> Mark 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>