[c-nsp] PPP Mulitilink on 3620

[David Simmons - EliteUKServe.Net]

by just enabling the global i get this:

sh adj detail
Protocol Interface                 Address
IP       Multilink1                point2point(9)
                                   181448 packets, 81844881 bytes
                                   FF030021
                                   CEF   expires: 00:02:24
                                         refresh: 00:00:24
IP       Ethernet0/0               ************(9)
                                   (xx.xx.xx.xx)
                                   311231 packets, 112118338 bytes
                                   0009E954B05400107BA5BC410800
                                   ARP        03:57:30  

So should I also add to the interfaces induvidually as well?

Will this now mean I get the 20000 pps as opposed to the 2000?

Cheers,

Dave


On Thursday 24 February 2005 10:25, Gert Doering wrote:
> Hi,
>
> On Thu, Feb 24, 2005 at 10:22:04AM +0000, David Simmons - EliteUKServe.Net 
wrote:
> > Thanks for that. When you say interface level ... just the multilink int
> > or each searial. What about the ethernet port?
>
> Multilink and Ethernet.  The individual serials should not be necessary
> (but it cannot hurt to do it anyway).
>
> gert